Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: coaming construction methods compare
By:Jay Babina
Date: 1/5/2010, 12:53 pm

You can use epoxy like contact cement to glue upĀ larger veneer pieces. You have to experiment with your epoxy as far as heat and time or do it on the weekend when you're around.

You coat each surface good. Then there will be a period when the epoxy has kicked and becomes very tacky. You can then put the pieces together and roll them down. Make sure your veneer sandwich will make the bend around the front of the cockpit. The glass sandwich I used is quite flexible but stiffens up more each day. Once I add a another tape layer on the outside and inside and it was well hardened, it was very strong and stiff. Labor-wise it's fairly simple.

Messages In This Thread

Material: coaming construction methods compared
DaveS -- 1/3/2010, 9:44 am
Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 8:48 am
Re: Material: coaming construction methods compare
wwfloyd -- 1/5/2010, 1:10 pm
Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 4:39 pm
Re: Material: coaming construction methods compare
Don -- 1/5/2010, 10:46 am
Re: Material: coaming construction methods compare
Jay Babina -- 1/5/2010, 12:53 pm
Re: Material: coaming construction methods compare
george jung -- 1/5/2010, 4:34 pm
Re: Material: coaming construction methods compare
Don -- 1/4/2010, 6:53 pm
Re: Material: coaming construction methods compare *PIC*
Scott Fitzgerrell -- 1/4/2010, 4:23 pm
Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:09 pm
Re: Material: coaming construction methods compare
Etienne Muller - Ireland -- 1/4/2010, 3:49 pm
Thanks *NM*
mtkayak -- 1/4/2010, 4:22 pm
Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:11 pm
Re: Material: coaming construction methods compare *PIC*
mtkayak -- 1/4/2010, 2:10 pm
Re: Material: coaming construction methods compare
Bob Brownie -- 1/4/2010, 11:15 am
Re: Material: coaming construction methods compare *PIC*
Etienne Muller - Ireland -- 1/3/2010, 12:27 pm
Re: Material: coaming construction methods compare
Bill Hamm -- 1/4/2010, 12:22 am
Re: Material: coaming construction methods compare *PIC*
Etienne Muller - Ireland -- 1/3/2010, 12:28 pm
Re: Material: coaming construction methods compare
kirk Briggs -- 1/3/2010, 11:37 am
Re: Material: coaming construction methods compare
Andy Boyd -- 1/3/2010, 8:50 pm
Re: Material: coaming construction methods compare *PIC*
tony olsen -- 1/4/2010, 8:21 am
Re: Material: coaming construction methods compare
Bill Hamm -- 1/5/2010, 1:00 am
Re: Material: coaming construction methods compare
Ric -- 1/3/2010, 11:04 pm
Re: Material: coaming construction methods compare
george jung -- 1/3/2010, 3:29 pm
Re: Material: coaming construction methods compare
Bill Hamm -- 1/4/2010, 12:18 am
Re: Material: coaming construction methods compare
DaveS -- 1/3/2010, 11:59 pm