Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: temperature and glue
By:Palle Dam
Date: 1/5/2010, 6:50 pm
In Response To: Strip: temperature and glue (eric Platou)

: I am building a 17' sea kayak. I am just now ready to start laying
: up the strips on the frame. I am in Chicago and the temperature
: just dropped to 10ish. Cold yes but since I am Norwegian I can
: handle the cold. The glue on the other hand is domestic and am
: not sure if it will cure well, and if it does will it have lost
: any strength. I do not have the name of the glue, but it is your
: normal waterproof yellow glue. I will be fiberglassing later
: when the weather warms. Any insight would be great. I want to
: keep on working on this as my winter project, but I do not want
: to waste money heating the area. Thank you for your insight.

You can actually buy PVAc glue (yellow glue) for winter use. I don't know the us glue brands, but I have found one that is sold i Norway (and Denmark):

http://www.bostik.no/Products/Direct/P0072.aspx (It's in Norwegian - others can use google translate).

Bostik does have an us homepage (www.bostik-us.com), but I can't find this specific glue. Maybe it's called something else.

Another glue is "Casco Vinterlim" (Vinterlim=Winter glue): http://www.cascono.dk/_upl/pdf/CascolVinterlim.pdf (Also in Norwegian - sorry).

Maybe you can also find it here: http://www.cascoadhesives.com/

Both glues will work down to -10 C (about 14 F). And they can be stored down to -40 C / -40 F.

Palle Dam, Denmark

Messages In This Thread

Strip: temperature and glue
eric Platou -- 1/4/2010, 4:14 pm
Re: Strip: temperature and glue
Palle Dam -- 1/5/2010, 6:50 pm
Re: Strip: temperature and glue
eric Platou -- 1/6/2010, 10:17 am
Re: Strip: temperature and glue
Bob Beaullieu -- 1/6/2010, 12:51 pm
Re: Strip: temperature and glue
Allan -- 1/4/2010, 6:50 pm
Re: Strip: temperature and glue
eric Platou -- 1/5/2010, 9:25 am
Re: Strip: temperature and glue
Andy Boyd -- 1/4/2010, 5:28 pm
Re: Strip: temperature and glue
eric Platou -- 1/4/2010, 6:03 pm
Re: Strip: temperature and glue
Bill Hamm -- 1/5/2010, 12:50 am