Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Tune up for pumps (chuck them)
By:Bill Hamm
Date: 2/19/2012, 3:35 am
In Response To: Re: Epoxy: Tune up for pumps (chuck them) (Ric Moodie)

: I used pumps for my first boat and then they clogged. I threw them
: away and have used a homemade balance for the last three boats.
: I have never had a bad batch using the balance and I will never
: use pumps again. Bulding the balance took about 15 minutes and
: some scrap wood and wire. The resin and hardener both go into
: the same container and I can mix whatever volume I wish. The
: design was described here on the forum in 2008. The description
: was on the contributer's web-site and doesn't seem to be
: available anymore however others have described similar balances
: for example:
: http://www.duckworksmagazine.com/05/articles/scale/index.cfm
: Once the principle is clear you can set it up in a variety of ways.

: Ric

Everyone has their own way it seem, while I'd love to have West's gear pump I don't use it enough to warrant the price. Their mini-pumps have worked fine for me for 20 odd years, suspect they will continue. Yep, have to be replaced on occasion, they are pretty cheap.

Bill H.

Messages In This Thread

Epoxy: Tune up for pumps
John Faas -- 2/17/2012, 7:53 pm
Re: Epoxy: Tune up for pumps
Kirk Fredericks -- 2/17/2012, 8:24 pm
Re: Epoxy: Tune up for pumps
John Abercrombie -- 2/17/2012, 8:36 pm
Re: Epoxy: Tune up for pumps
Dean -- 2/17/2012, 10:07 pm
Re: Epoxy: Tune up for pumps
George in Va. -- 2/17/2012, 11:55 pm
Re: Epoxy: Tune up for pumps
Mike Bielski -- 2/18/2012, 12:20 am
Re: Epoxy: Tune up for pumps
Charles Robinson -- 2/18/2012, 8:17 am
Re: Epoxy: Tune up for pumps *PIC*
Thomas Duncan -- 2/18/2012, 8:49 am
Re: Epoxy: Tune up for pumps
Etienne Muller -- 2/18/2012, 9:08 am
Re: Epoxy: Tune up for pumps
Oliver Bloch -- 2/18/2012, 11:43 am
Re: Epoxy: Tune up for pumps (chuck them)
Ric Moodie -- 2/18/2012, 11:21 pm
Re: Epoxy: Tune up for pumps (chuck them)
Bill Hamm -- 2/19/2012, 3:35 am
Exactly
Jay Babina -- 2/19/2012, 8:12 am
Re: Exactly
Thomas Duncan -- 2/19/2012, 10:15 am
Re: Exactly
Mike Bielski -- 2/19/2012, 6:39 pm
Re: Epoxy: Tune up for pumps
Matthew Bastian -- 2/20/2012, 8:32 pm
Re: Epoxy: Tune up for pumps
Ric Moodie -- 2/20/2012, 10:47 pm
Re: Epoxy: Tune up for pumps
Mike Savage -- 2/21/2012, 5:23 am