: I'm refinishing our kayaks, first time since built. Artic Tern 17
: and 14. I started sanding, believing I need to remove ALL of the
: old finish. But I'm running into glass more often than I like.
: Is it neccessary to remove all the old? Can I just lightly sand
: old finish and spray new on top of old? Will new finish clear up
: the glass or do I need to touch up with epoxy and sand before I
: refinish? Original finish was clear urethane. I planed on having
: them sprayed with a 2 part auto-body clear-coat. Will the clear
: coat have to be sanded down to epoxy next time I refinish them?
: If so, I might be sorrry I did it a few years from now. Thanks
: for any feed back and advice.
All I do is lightly sand and re-apply the varnish.