Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: A little coaming help
By:Bill Hamm
Date: 6/11/2012, 2:45 am
In Response To: Re: Skin-on-Frame: A little coaming help (Eric Mattison)

: Honestly, your weight should not be much of a factor in the coaming
: attachment. So long as the kayak is able to support your weight,
: the coaming should as well. You really don't put that much
: pressure on it. You might need to evaluate the aft deck as you
: will probably be sitting on it to get into the boat. Modern
: kayaks with a keyhole coaming make it easy to sit on the coaming
: to slide in. You can't really do that with a traditional boat.
: You have to sit down on aft deck to slide in. Take a look at the
: tutorial below. Notice where he puts his hands to slide into the
: boat.

: http://www.capefalconkayak.com/usingyourgreenlandkayak.html

: I paddle a Sea Ranger with a floating coaming ring and it is
: surprisingly solid, but I don't sit on it as I have found that
: those two inches of height difference really make things
: unstable.

: Eric M.

Sea Ranger is seriously stable once it's leaned a bit, wiggly on center though.

I can put the coaming and skirt under water up to my side before it loses initial stability, pretty hard to do by mistake, but give me a chance I'll figure out how ;)

Bill H.

Messages In This Thread

Skin-on-Frame: A little coaming help
Stefalo -- 6/5/2012, 7:49 pm
Re: Skin-on-Frame: A little coaming help
Marc Upchurch -- 6/6/2012, 7:56 am
Re: Skin-on-Frame: A little coaming help
Jeff B -- 6/6/2012, 8:04 am
Re: Skin-on-Frame: A little coaming help
Stefalo -- 6/6/2012, 1:13 pm
Re: Skin-on-Frame: A little coaming help
Noel Bennett -- 6/6/2012, 8:26 pm
Re: Skin-on-Frame: A little coaming help
stefan -- 6/6/2012, 11:54 pm
Re: Skin-on-Frame: A little coaming help
Noel Bennett -- 6/7/2012, 12:07 am
Re: Skin-on-Frame: A little coaming help
Bill Hamm -- 6/11/2012, 2:41 am
Re: Skin-on-Frame: A little coaming help
Bill Hamm -- 6/11/2012, 2:43 am
Re: Skin-on-Frame: A little coaming help
Eric Mattison -- 6/7/2012, 1:09 pm
Re: Skin-on-Frame: A little coaming help
Stefalo -- 6/7/2012, 2:07 pm
Re: Skin-on-Frame: A little coaming help
Bill Hamm -- 6/11/2012, 2:45 am