Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Skeg for existing Guillemot L
By:John Messinger
Date: 6/15/2012, 9:44 am
In Response To: Re: Other: Skeg for existing Guillemot L (Bob Johns)

: Yes, such a fix should prevent windcocking, IF you get the area
: right. Or it may be too small in some situations and
: still weathercock. There again it may be too big in some situations
: and cause leecocking. One thing for sure is that
: it will make your boat less maneuverable.

: Skeg adjustability gives you two boats in one. A maneuverable
: sports car type and a straight line sedan type.
: Not having any adjustability is like playing golf with only one
: club, not much fun.

: One day I found myself overworked and not gaining much distance
: while paddling with skeg up in high wind. Skeg
: down was easy and I could apply my energy to forward motion. So I
: ran an experiment to check out how useful my
: skeg was.

: I started paddling away from the wind, just paddling with no course
: corrections of any kind. With the skeg up I
: was turned straight into the wind in forty seconds. I immediately
: did the same thing with skeg down and was
: turned straight upwind in 300 seconds, almost four minutes. Just
: sayin'.

: Yes, this has been done as is very successful. It has been used for
: decades whereas the "foiled" shape is fairly new.
: This link shows a clear picture of the "pie slice" type
: adjustable skeg.
: http://www.ukseakayakguidebook.co.uk/skeg_repair/art_skeg_repair.htm
: Notice that it is a little shorter and deeper than the permanent
: skeg you describe in your first paragraph above, but
: it is the same basic idea only with adjustability.

: I am a forgetful old fart and leave my skeg down when I shouldn't
: more often than I will admit, and although I get
: pushed sideways into coral or rolled up the beach I have always
: found my skeg to be self-retracting, not broken. With
: my paddling style I don't think the foiled type would last very
: long.

: ~Bob

Thank you. I meant to mention you in the OP, but, being a forgetful old fart myself, it got away from me.

Messages In This Thread

Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 9:39 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messsinger -- 6/12/2012, 9:43 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 9:44 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 9:58 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 10:07 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 10:11 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 10:24 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/12/2012, 10:27 pm
Re: Other: Skeg for existing Guillemot L
Kevin Greer -- 6/13/2012, 6:11 am
Re: Other: Skeg for existing Guillemot L
Randy Echtinaw -- 6/14/2012, 6:13 pm
Re: Other: Skeg for existing Guillemot L
John Messinger -- 6/14/2012, 7:54 pm
Re: Other: Skeg for existing Guillemot L
Bob Johns -- 6/15/2012, 6:48 am
Re: Other: Skeg for existing Guillemot L
John Messinger -- 6/15/2012, 9:44 am
Re: Other: Skeg for existing Guillemot L
Paul Davies -- 6/14/2012, 3:45 pm
Re: Other: Skeg for existing Guillemot L
John Messinger -- 6/15/2012, 8:40 pm
Re: Other: Skeg for existing Guillemot L *PIC*
John Messinger -- 6/17/2012, 9:41 am
Skeg Report *PIC*
john Messinger -- 7/23/2012, 9:19 pm
Re: Skeg Report *PIC*
Malcolm Schweizer -- 7/24/2012, 11:33 am
Re: Skeg Report
John Messinger -- 7/24/2012, 1:23 pm
Re: Skeg Report
Malcolm Schweizer -- 7/24/2012, 1:38 pm
Re: Skeg Report
Bill Hamm -- 7/25/2012, 1:45 am
Re: Skeg Report
Malcolm Schweizer -- 7/25/2012, 6:39 am
Re: Skeg Report
Kirk Fredericks -- 7/25/2012, 9:36 am