Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Launching: Carbon Kevlar Mariner Max

They are caps for 3/4" Schedule 40 PVC pipe, so about 1 1/16" across the recess.
I had to look around a bit to find caps that were rounded on the end - easier to wrap the epoxy and glass around than the square-ended ones.
The cross bar is 3/16 SS rod which protrudes about 1/4" out each side of the cap, under deck.

John

Thank you for those details.

John U

Messages In This Thread

Launching: Carbon Kevlar Mariner Max *PIC*
Re: Launching: Carbon Kevlar Mariner Max
Re: Launching: Carbon Kevlar Mariner Max
Re: Launching: Carbon Kevlar Mariner Max