> Jason,

> Grizzly has this bull nose bit with a 1/4" diameter, perfect for the
> bead. Cost is $11.95. This will do the bead in one pass.

> They also have an internal radius bit with a 1/4" diameter for
> $11.95. Or a 1/4" core box bit for $7.95. Eiter of these should work
> for the cove.

> Can anybody think of a reason not to use these bits.

> Does the cutter diameter make a difference in the cut? It seems like the
> larger cutter diameter may cut the wood a little more gradually.

> Mike

I was wrong about the internal radius at grizzly, they only go down to a 3/16" radius.

That leaves the bull nose and the core box. George says the core box can cause problems. Anybody else have an opinion?

Mike