painting or re-finishing guillemot?
By:Chris Ouimet
Date: 1/25/2001, 9:25 pm
Date: 1/25/2001, 9:25 pm
My Guillemot is approximately 2 yrs old and getting extremely white/cloudy. I think this is due to using an inexpensive epoxy (Blem) and also because of lack of experience. I have since built a second kayak using the west system 207 with great results. I am considering the two following options
1-re-finish the kayak by sanding to the wood. Is this possible? What would be the most efficient way of doing this? Would I have to get to the bare wood and how much of the saturated wood would I have to sand? I'm assuming approximately less than a 16th of an inch.
2-or I can just paint the kayak, I'm not to crazy about this option.
Thanks in advance
Messages In This Thread
- painting or re-finishing guillemot?
Chris Ouimet -- 1/25/2001, 9:25 pm- re-finishing guillemot?
Sam McFadden -- 1/26/2001, 7:58 pm - Re: painting or re-finishing guillemot?
Eric Schade (shearwater boats) -- 1/26/2001, 6:56 pm - Re: painting or re-finishing guillemot?
Pete Rudie -- 1/26/2001, 12:13 am- Re: painting or re-finishing guillemot?
Shawn Baker -- 1/26/2001, 11:51 am
- Re: painting or re-finishing guillemot?
- re-finishing guillemot?