Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Pneumatic ROS drawbacks.
By:Mark Kanzler
Date: 6/17/1998, 12:21 am
In Response To: Spatter Safety and Wet Sanding (Pete Ford)

I was looking at the specs for a pneumatic random orbit sander (Link Below) and noticed that my compressor isn't even close (2hp) to the required cfm output.

> Once I get to the wet sanding stage I have been doing it by hand
> since: 1. I usually wet sand on the final coat of epoxy and then in
> between varnish coats - by this time I am not removing much and power
> sanding is harder to control. 2. When i tried to wet sand with the
> power sander it shot splatters all over the place. 3. The hook and
> loops got flimsy in the water 4. I couldn't find wet sanding paper
> in discs.

> If someone could solve 3 and 4 then I'd probably give it a try
> again...

Messages In This Thread

ROS Recommendations?
john Engels -- 6/15/1998, 2:51 pm
Re: ROS Recommendations?
NPenney -- 6/16/1998, 7:54 am
Re: ROS Recommendations?
Don Kerr -- 6/16/1998, 12:15 pm
Re: DeWalt tools
Mark Kanzler -- 6/17/1998, 12:01 am
Re: ROS Recommendations?
Nick Schade -- 6/15/1998, 7:30 pm
Re: ROS Recommendations?
Ken Wallo -- 6/15/1998, 6:14 pm
Re: Electrical Safety and Wet Sanding
Mark Kanzler -- 6/15/1998, 6:17 pm
Spatter Safety and Wet Sanding
Pete Ford -- 6/15/1998, 8:02 pm
Re: Pneumatic ROS drawbacks.
Mark Kanzler -- 6/17/1998, 12:21 am
Re: Spatter Safety and Wet Sanding
Mark Kanzler -- 6/16/1998, 11:53 am
Re: ROS Recommendations?
Mike R -- 6/15/1998, 6:06 pm
Bosch is excellent!
Pete Ford -- 6/15/1998, 5:14 pm
Re: Bosch is excellent!
Ross Leidy -- 6/15/1998, 5:41 pm
vacuuming is nice
Pete Ford -- 6/15/1998, 7:55 pm
Re: vacuuming is nice, but you don't get to keep the dust.
Mark Kanzler -- 6/16/1998, 11:40 am
Re: Bosch is excellent!
Mark Kanzler -- 6/15/1998, 6:13 pm
Re: Bosch is excellent! (another source)
Mark Kanzler -- 6/15/1998, 5:36 pm
Re: ROS Recommendations?
Mike Spence -- 6/15/1998, 3:39 pm
Re: ROS Recommendations?
Mark Kanzler -- 6/15/1998, 3:37 pm