For the record...
In Response To: Re: Wet sanding and varnishing. (Rob Macks)
: Unless you are buffing out a finish any grit over 220 is a waste of effort
: when varnishing an epoxy coated boat surface.
I suggested that he 400 and/or 600 grit to create a satin finish, not as prep for additonal varnish coats.
Messages In This Thread
- Wet sanding and varnishing.
John Monfoe -- 7/28/2001, 5:42 am- Re: Wet sanding and varnishing.
Jay Babina -- 7/31/2001, 9:36 am- Re: Wet sanding and varnishing.
Rob Macks -- 7/28/2001, 2:23 pm- For the record...
Brian Nystrom -- 7/30/2001, 1:07 pm- Thanks to Rob for his finishing advices
Andreas Albat -- 7/30/2001, 11:25 am- Re: Thanks to Rob for his finishing advices
Rob Macks -- 7/30/2001, 12:44 pm
- Re: Wet sanding and varnishing.
John Monfoe -- 7/29/2001, 2:19 am- trade the sanding for a day of paddling
Paul G. Jacobson -- 7/30/2001, 3:27 am- Re: trade the sanding for a day of paddling
John Monfoe -- 7/30/2001, 4:37 am- getting a good seat to the BWCA
Paul G. Jacobson -- 7/31/2001, 4:28 am- Re: getting a good seat to the BWCA
John Monfoe -- 7/31/2001, 5:15 am- Re: getting a good seat to the BWCA
Julie Kanarr -- 7/31/2001, 10:36 am- Re: getting a good seat to the BWCA
John Monfoe -- 8/1/2001, 4:31 am- BWCA...Not a bad seat in the house
!RUSS -- 7/31/2001, 3:57 pm- Re: BWCA...Not a bad seat in the house
John Monfoe -- 8/1/2001, 5:03 am
- BWCA...Not a bad seat in the house
- Re: getting a good seat to the BWCA
- Re: getting a good seat to the BWCA
- Re: getting a good seat to the BWCA
- getting a good seat to the BWCA
- Re: Wet sanding and varnishing.
Steve L -- 7/29/2001, 9:30 pm - Re: trade the sanding for a day of paddling
- Thanks to Rob for his finishing advices
- Re: Wet sanding and varnishing.
- Re: Wet sanding and varnishing.