Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Hello - and help with a bad scarf joint
By:Karl Kulp
Date: 8/5/1998, 1:00 pm
Date: 8/5/1998, 1:00 pm
In Response To: Re: Hello - and help with a bad scarf joint (Brian C.)
> I'm building a CLC Patuxent 19.5 and, it being my first as well,
> I had a couple of bad scarfs as well.
> The one that had a 'lip' showing (ie it was overlapped too much
> ) I took it apart with a spatula and rescarfed no problem.
> The one that low ( ie it was not overlapped enough ) I filled
> in with thickened epoxy and sanded it smooth. The lines are fine,
> the hull is fair, and it looks good enough to varnish!
Would your spatula be similar to the scarf-spanner I found in the kitchen drawer?
:-)
Messages In This Thread
- Hello - and help with a bad scarf joint
Don Herring -- 8/2/1998, 8:25 am- Re: Hello - and help with a bad scarf joint
Brian C. -- 8/5/1998, 11:12 am- Re: Hello - and help with a bad scarf joint
Karl Kulp -- 8/5/1998, 1:00 pm- Re: Hello - and help with a bad scarf joint
Brian C. -- 8/6/1998, 10:39 am
- Re: Hello - and help with a bad scarf joint
- Re: Hello - and help with a bad scarf joint
Jay Babina -- 8/3/1998, 4:30 pm- Re: Hello - and help with a bad scarf joint
Don Herring -- 8/2/1998, 7:52 pm- Re: Hello - and help with a bad scarf joint
Mark Kanzler -- 8/5/1998, 11:18 am
- Re: Hello - and help with a bad scarf joint
Mike Scarborough -- 8/2/1998, 1:17 pm- Re: bad scarf joint
Don Beale -- 8/2/1998, 10:44 am- Re: Hello - and help with a bad scarf joint
Brian -- 8/2/1998, 10:41 am - Re: Hello - and help with a bad scarf joint
- Re: Hello - and help with a bad scarf joint
