Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: 1/8" Bristle rollers
By:Nick Schade
Date: 10/28/1998, 5:22 pm
In Response To: Re: After filling the weave (Robert Woodard)

> Has anyone tried those little "pads" for cutting in trim for
> painting? I would think the short (~1/8") bristles would be ideal for
> applying thin coats (after the wet out) of epoxy but I've never worked
> with epoxy so I don't know for sure. I really did like those little trim
> brushes for paint (nice even coat).

You can get rollers made with the same short bristles as the trim painters. I find these rollers make fewere bubbles than the yellow foam epoxy rollers.

Messages In This Thread

After filling the weave
Bruce -- 10/26/1998, 9:16 pm
Re: After filling the weave
Nolan Penney -- 10/27/1998, 2:03 pm
Re: After filling the weave
Edgar Kleindinst -- 10/27/1998, 9:14 am
Re: After filling the weave
Robert Woodard -- 10/27/1998, 4:54 pm
Re: 1/8" Bristle rollers
Nick Schade -- 10/28/1998, 5:22 pm
Re: 1/8" Bristle rollers
Robert Woodard -- 10/28/1998, 5:41 pm
Re: 1/8" Bristle rollers
Philip Serra -- 11/4/1998, 12:28 am
Re: 1/8" Bristle rollers
Mark Kanzler -- 10/30/1998, 12:47 am
Re: 1/8" Bristle rollers
Nolan Penney -- 10/29/1998, 2:35 pm
2nd the Roller Motion
Pete Ford -- 10/27/1998, 4:43 pm
Re: After filling the weave
Brian C. -- 10/27/1998, 10:54 am
Re: After filling the weave
Mike Scarborough -- 10/26/1998, 9:57 pm
Re: After filling the weave
Bruce -- 10/27/1998, 9:54 pm