Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

End pour
By:bryan gorr
Date: 12/25/2004, 6:34 am
In Response To: S&G: Top load dooky schmutz end pour (Obee)

Hi folks and first of all Happy Holidays to all the building Brothers and Sisters out there. Peace, Prosperity and Health in the Year to come.

To avoid the heat generated by the end pour..were the resin exceeds 200ml I have good experience with glass bubbles. Although I would say that 200ml should be enough for such an endpour. By a larger "core-pour" divide it up into 150ml per hour keeping the resin rather fluid..you can mix in just about any fine substance obting for wood dust, or bubbles..being the most common.

warm regards
bryan
bremen,germany

Messages In This Thread

S&G: Top load dooky schmutz end pour
Obee -- 12/24/2004, 2:03 pm
Re: S&G: Top load dooky schmutz end pour
Paul G. Jacobson -- 12/29/2004, 10:08 pm
Re: S&G: Top load dooky schmutz end pour
Obee -- 12/30/2004, 1:54 pm
one last shot at changing your mind :)
Paul G. Jacobson -- 12/31/2004, 12:52 am
Re: one last shot at changing your mind :)
Thomas Duncan -- 12/31/2004, 9:57 pm
End pour
bryan gorr -- 12/25/2004, 6:34 am
Re: End pour
Obee -- 12/25/2004, 2:28 pm
Re: End pour *Pic*
bryan gorr -- 12/26/2004, 9:59 am
Erruption Possibility *Pic*
Lloyd E. Peterson -- 12/24/2004, 2:46 pm
Re: Erruption Possibility
Obee -- 12/24/2004, 3:38 pm
Re: Erruption Possibility
LeeG -- 12/24/2004, 4:51 pm