Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Wood and Canvas Kayak Building
By:Charlie
Date: 10/9/2007, 8:03 pm

This group is into everything. There were discussions and commentary on the performance of the "Walrus" some time ago. If you have time go into the archives and do a search. It's all in there somewhere. Someone even recalculated the forms so you don't have to waste all that plywood with the tall ones Puttz designed.

: I picked up another book on Amazon, to confuse myself further. It has the
: plans for the Walrus Esquimo Kayak that was created by Norman L. Skene,
: published in 1923 in The Rudder magazine. Apparently it was westernized re
: construction from an actual native kayak.
: Has anyone seen or paddled one of these boats? It appealed to me because the
: shape of the hull is determined by some forms which are included in the
: plans. The two other books on SOF leave me a bit confused on what shape
: hull I will end up with.
: But now that I look at the pictures, the boat looks really flat bottomed,
: wondering what I will end up with if I follow this plan. Thoughts or
: experience?

: Thanks again.

: Anyone in the Los Angeles area willing to bring a newbie into this addiction
: with some hands on guidance?

Messages In This Thread

Skin-on-Frame: Wood and Canvas Kayak Building by Putz
john faas -- 10/9/2007, 7:00 pm
Re: Skin-on-Frame: Wood and Canvas Kayak Building
Mike Hanks -- 10/13/2007, 3:14 pm
Putz's Walrus Part 1
Paul G. Jacobson -- 10/11/2007, 5:43 am
Putz's Walrus Part 2
Paul G. Jacobson -- 10/11/2007, 5:37 am
Re: Skin-on-Frame: Wood and Canvas Kayak Building
Bill Hamm -- 10/10/2007, 12:59 am
Re: Skin-on-Frame: Wood and Canvas Kayak Building
Charlie -- 10/9/2007, 8:03 pm
Re: Skin-on-Frame: Wood and Canvas Kayak Building
West -- 10/9/2007, 10:11 pm