Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: This is the Hardest Part
By:KenC
Date: 7/19/2002, 8:27 am
In Response To: Re: Strip: This is the Hardest Part *Pic* (John Monroe)

: I spray glued
: the foam and hook and loop ROS and pressed them together, then sprayed the
: top side of the foam pad and stock a sticky sanding disc to it. If you
: have some foam handy you might give it a try in the inside of your boat.

Hi John;
If you spray glued the foam to the hooks on the ROS, have you been able to remove the foam and use the sander with its original base? I would think the process would permanently gum up the hooks.

Ken

Messages In This Thread

Strip: This is the Hardest Part *Pic*
Chip Sandresky -- 7/19/2002, 3:28 am
Re: Strip: This is the Hardest Part
Greg Hughes -- 7/19/2002, 8:53 am
Re: Strip: This is the Hardest Part
Chip Sandresky -- 7/19/2002, 12:08 pm
Homemade Scraper
Charles Leach -- 7/19/2002, 9:39 am
Re: Another Type of Homemade Scraper
John Monroe -- 7/20/2002, 4:52 am
Re: Homemade Scraper *Pic*
Greg Hughes -- 7/19/2002, 5:39 pm
Re: Homemade Scraper *Pic*
Chip Sandresky -- 7/19/2002, 5:46 pm
Re: Homemade Scraper *Pic*
Ben Staley -- 7/19/2002, 10:37 am
Re: Homemade Scraper
daren neufeld -- 7/19/2002, 8:42 pm
Re: Homemade Scraper
Ben Staley -- 7/29/2002, 10:32 am
Re: Homemade Scraper
daren neufeld -- 7/29/2002, 8:26 pm
Re: Homemade Scraper
Shawn Baker -- 7/19/2002, 11:32 am
Re: Homemade Scraper
Ben Staley -- 7/19/2002, 2:43 pm
Re: Plastic Scraps *Pic*
Shawn Baker -- 7/19/2002, 9:18 pm
Re: Strip: This is the Hardest Part *Pic*
John Monroe -- 7/19/2002, 6:24 am
Re: Strip: This is the Hardest Part
KenC -- 7/19/2002, 8:27 am
Re: Strip: This is the Hardest Part
John Monroe -- 7/20/2002, 4:26 am