Not in my experience
In Response To: Re: Epoxy: Talc? (Bill Hamm)
I've used it as a thickener for epoxy coated paddle tips and have never had any problems with it in the water. If you're finding that it's soaking up water, it probably means that it's not mixed well enough into the epoxy.
That said, I've also found that it's not as thixiotropic as fumed silica. It will thicken epoxy to the point that it runs slower, but that's about it.
Messages In This Thread
- Epoxy: Talc?
Kudzu -- 4/8/2008, 9:02 am- Re: Epoxy: Talc?
Robert Hancock -- 4/11/2008, 7:34 am- Re: Wheat flout
Kudzu -- 4/9/2008, 7:10 pm- Re: Wheat flout
Toni V -- 4/10/2008, 2:47 am- One thing about Wheat flout
Gennie -- 4/13/2008, 2:33 am- Re: One thing about Wheat flout
Mike Savage -- 4/13/2008, 6:08 am- Re: One thing about Wheat flout
Toni V -- 4/13/2008, 4:14 am - Re: One thing about Wheat flout
- Re: One thing about Wheat flout
- Re: Wheat flout
Glen Smith -- 4/9/2008, 7:26 pm- Re: Wheat flout
Mike Savage -- 4/9/2008, 7:21 pm - One thing about Wheat flout
- Re: Epoxy: Talc?
Bill Hamm -- 4/8/2008, 8:18 pm- Re: Epoxy: Talc?
prasad bhatla -- 4/9/2008, 1:30 am
- Re: Epoxy: Talc?
Toni V -- 4/8/2008, 6:40 pm- Re: Epoxy: Talc?
Scott Fitzgerrell -- 4/8/2008, 4:20 pm- Good Info!
Kudzu -- 4/8/2008, 7:50 pm
- Re: Epoxy: Talc?
John Eberly -- 4/8/2008, 12:47 pm- Re: Epoxy: Talc?
Dan Caouette (CSFW) -- 4/8/2008, 2:09 pm
- Re: Epoxy: Talc? ------WebKitFormBoundaryryBPf+mhT *LINK*
Jay Babina ------WebKitFormBoundaryryBPf+mhTSdadl5 -- 4/8/2008, 11:03 am- Re: Epoxy: Talc? ------WebKitFormBoundaryryBPf+mhT
Mike Savage -- 4/8/2008, 11:37 am- Re: Epoxy: Talc?
Dan Caouette (CSFW) -- 4/8/2008, 1:59 pm- Re: Epoxy: Talc?
Mike Savage -- 4/8/2008, 3:17 pm
- Re: Epoxy: Talc?
- Re: Epoxy: Talc?
- Re: Epoxy: Talc?
Bill Hamm -- 4/8/2008, 9:24 am- Not in my experience
Brian Nystrom -- 4/11/2008, 7:03 am
- Re: Epoxy: Talc?
Robert McMurray -- 4/8/2008, 9:18 am - Re: Wheat flout
- Re: Epoxy: Talc?