Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Ah-Ha! There they are!
By:Pedro Almeida
Date: 7/30/2008, 6:03 pm
In Response To: Re: Ah-Ha! There they are! (Brion)

The "Store SKU#" is 112364. The model#/part# is 118-9. The number under the bar code is 0 77089 11812 4. They are made by Linzer, but Home Depot sells (sold?) them under the names Project Select and/or Performance Select. They are 9" rollers, but I cut them in half and use them with a small roller frame. The plastic wrapper on the Performance Select rollers say 1/4" nap, but that's just a typo. They have 1/8" bristles.

If you try them, don't press down too hard while rolling and remember to tip off with one of those cheap disposable brushes. Also, please let me know how they worked out for you.

Good luck,

Pedro

Messages In This Thread

Epoxy: Fill coat tricks with Raka?
Kudzu -- 4/5/2008, 4:16 pm
Re: Epoxy: Fill coat tricks with Raka?
Dave Houser -- 4/7/2008, 1:10 am
Re: Epoxy: Fill coat tricks with Raka?
Pedro Almeida -- 4/6/2008, 12:18 am
Pedro, what do you use to spread the thicker epoxy
Gini -- 7/29/2008, 10:21 am
Re: Pedro, what do you use to spread the thicker e
Pedro Almeida -- 7/29/2008, 5:21 pm
Pedro - where do you get those bristle rollers?
Brion -- 7/29/2008, 8:24 pm
Ah-Ha! There they are! *LINK*
Pedro Almeida -- 7/29/2008, 9:36 pm
Re: Ah-Ha! There they are!
Gini -- 7/30/2008, 12:22 am
Re: Ah-Ha! There they are!
Brion -- 7/29/2008, 9:46 pm
Re: Ah-Ha! There they are!
Brion -- 7/29/2008, 9:50 pm
Re: Ah-Ha! There they are!
Pedro Almeida -- 7/30/2008, 6:03 pm
Re: Ah-Ha! There they are!
Tom Raymond -- 7/31/2008, 12:34 pm
Seal coat or not?
Pedro Almeida -- 7/31/2008, 1:06 pm
Re: Pedro - where do you get those bristle rollers
Pedro Almeida -- 7/29/2008, 9:19 pm
How about this SKU
Gini -- 7/30/2008, 12:27 am
Re: Epoxy: Fill coat tricks with Raka?
Kudzu -- 4/6/2008, 8:24 am
Re: Epoxy: Fill coat tricks with Raka?
Tim -- 7/28/2008, 11:14 am
Re: Epoxy: Fill coat tricks with Raka?
Kudzu -- 7/28/2008, 5:13 pm