: I use partial sheerclamps in the ends, then tape what is relatively easy to
: reach. Both methods work about equally, but the taped seam is lighter and
: perhaps somewhat stronger. I use pieces long enough so I can reach them
: thru the hatches.

: Even most realatively round hull deck combinations usually flatten out enough
: at the bow/stern so this method works.

: Bill H.

Hi Bill

That is a good idea. Getting into the ends is a pain but that would really solve the problem.

For sheerclamps I usually just use two extra cedar strips each side laminated into place. The extra weight is negligible and they follow the curve easilly. I do this after inner glassing.

I figure the method is plenty strong if thickened epoxy is used to glue down the deck.

Et