Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: PVC Fabric Color Selection
By:wwfloyd
Date: 7/22/2009, 12:09 pm

Let me say this, about that: The inland waters I paddle tend to leave stains (particularly since I'm rarely bothered to rinse off the boats). White will show stains more than other colors. Otherwise, I do kind of like your proposed colors.

: This may be a silly question but before I place an order I figured I'd ask.

: I'm building a Yost Sonnet and was going to go with relatively traditional
: colors you see on commercially-produced boats, a white hull with a single
: color deck. Looking at some of the previously made ones, however, you
: don't see white used much, if at all

: I imagine this is mostly based on personal preference and available
: materials, but is there any reason to not use white for a hull? I wanted
: to make sure there wasn't a practical reason white was avoided, such as
: scratches showing up black or something weird like that.

: Thanks!

Messages In This Thread

Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 11:44 am
Re: Skin-on-Frame: PVC Fabric Color Selection
Sean -- 7/24/2009, 8:23 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
Phil Nelson -- 7/22/2009, 8:24 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 8:49 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
Paul G. Jacobson -- 7/26/2009, 6:39 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
Tom Yost -- 7/22/2009, 8:23 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 8:52 pm
Re: Skin-on-Frame: PVC Fabric Color Selection
wwfloyd -- 7/22/2009, 12:09 pm
White stains, makes sense
Troy -- 7/22/2009, 2:01 pm
Re: White stains, makes sense
Bill Hamm -- 7/23/2009, 9:12 am