Re: Skin-on-Frame: PVC Fabric Color Selection
By:Troy
Date: 7/22/2009, 8:49 pm
Date: 7/22/2009, 8:49 pm
In Response To: Re: Skin-on-Frame: PVC Fabric Color Selection (Phil Nelson)
For this boat, the recommendation was to go with 18 oz fabric for the hull, 10 oz for the deck. So I was working with two pieces regardless.
: Another reason for staying with a common colour for hull & deck is that
: PVC fabric comes in big widths. For the timber/folding construction method
: you can often get the hull & deck from 1x boat length of fabric.
Messages In This Thread
- Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 11:44 am- Re: Skin-on-Frame: PVC Fabric Color Selection
Sean -- 7/24/2009, 8:23 pm- Re: Skin-on-Frame: PVC Fabric Color Selection
Phil Nelson -- 7/22/2009, 8:24 pm- Re: Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 8:49 pm- Re: Skin-on-Frame: PVC Fabric Color Selection
Paul G. Jacobson -- 7/26/2009, 6:39 pm
- Re: Skin-on-Frame: PVC Fabric Color Selection
- Re: Skin-on-Frame: PVC Fabric Color Selection
Tom Yost -- 7/22/2009, 8:23 pm- Re: Skin-on-Frame: PVC Fabric Color Selection
Troy -- 7/22/2009, 8:52 pm
- Re: Skin-on-Frame: PVC Fabric Color Selection
wwfloyd -- 7/22/2009, 12:09 pm- White stains, makes sense
Troy -- 7/22/2009, 2:01 pm- Re: White stains, makes sense
Bill Hamm -- 7/23/2009, 9:12 am
- Re: White stains, makes sense
- Re: Skin-on-Frame: PVC Fabric Color Selection
- Re: Skin-on-Frame: PVC Fabric Color Selection