I would not be concerned with glue or adhesive since it would be lashed, and i am able to get wood around here but sometimes it is a bit of a mission to find something suitable. I have a specialty sawmill that I use and he can get pretty much anything I need. I was just curious if anyone had tried the composite stuff.

: I would be concerned with how well, or how poorly, this stuff could be glued.
: Not sure epoxy would bond very well to the plastic. That would lead to
: problems with glassing it, too.

: If cedar or redwood are not available in your area, look for common white
: woods, such as spruce, pine, or fir. Construction grades are sold as 2x4s,
: while better grades are sold in other sizes for use as 'trim'. The most
: expensive tuf you'll find is clear wood which has been shaped into
: mouldings.

: Talk to the people who run the lumber department and ask if they can
: special-order wood for you. You should be able to order ash, oak, maple,
: and poplar or aspen. Ask for 1x6s in lengths close to 8 feet.

: Rockler will happily sell you a board by mail-order, or online. Check the
: shipping costs. This is not a cheap way to buy wood, but you don't need
: lot for a SOF.

: Just some ideas

: PGJ