Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: More info
By:Bill Hamm
Date: 10/20/2009, 12:55 am
In Response To: Re: More info (Ric)

: This topic came up here a few months ago and a look through the Archives
: should find it. I just drill four 1/16" reference holes at the
: corners of the hatch outline that I have marked on the outside of the
: deck. Then I use those holes to line up the outline pattern on the inside.
: I go ahead and make the lip, centering it on the outline I marked. After
: the lip has cured I remove it and then cut out the hatch from the outside.
: I've done four hatches this way with no problems. (I put stiffeners on the
: underside of the hatch before I cut it.)

: Ric

Yeah, it's how I start the hatches too, but the smallest number of starts to me would be better.

Bill H.

Messages In This Thread

Strip: Flush Hatches from the Book
Ned Smith -- 10/18/2009, 4:45 pm
Add a plastic mold release layer *Pic*
John Caldeira -- 10/18/2009, 6:40 pm
More info *Pic*
John Caldeira -- 10/18/2009, 6:44 pm
Re: More info
george jung -- 10/18/2009, 10:17 pm
Re: More info
Bill Hamm -- 10/19/2009, 12:29 am
Re: More info
Ric -- 10/19/2009, 11:19 am
Re: More info
Bill Hamm -- 10/20/2009, 12:55 am
Re: More info
george jung -- 10/20/2009, 2:16 pm
Re: More info - stiffeners *LINK*
Ric -- 10/21/2009, 2:23 pm
Re: More info - stiffeners
Bill Hamm -- 10/22/2009, 3:05 am
Re: More info - stiffeners
george jung -- 10/22/2009, 1:52 pm
Re: More info - stiffeners
Bill Hamm -- 10/22/2009, 5:12 pm
Re: More info - stiffeners
Bill Hamm -- 10/22/2009, 5:14 pm
Re: More info
Bill Hamm -- 10/21/2009, 12:29 am
"Tabbing" hatch covers *Pic*
John Caldeira -- 10/18/2009, 11:59 pm
Re: "Tabbing" hatch covers
george jung -- 10/19/2009, 2:14 pm
Re: "Tabbing" hatch covers
Ric -- 10/19/2009, 4:31 pm
Re: Strip: Flush Hatches from the Book
JohnK -- 10/18/2009, 6:10 pm
Re: Strip: Flush Hatches from the Book
Ned Smith -- 10/19/2009, 12:58 pm
Re: Strip: Flush Hatches from the Book
Bill Hamm -- 10/20/2009, 12:51 am
Re: Strip: Flush Hatches from the Book
Ross Leidy -- 10/19/2009, 2:19 pm