Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Albus wood strips
By:Mike Bielski
Date: 4/8/2010, 8:19 pm
In Response To: Re: Strip: Albus wood strips (dhwdaniels)

: I am building a Night Heron out of poplar strips. The density is
: round 0.4. WRC is 0.3 and Fir 0.6 so light enough. It is much
: stronger than WRC and here in Holland much cheaper.
: It bends very well and is carved easy with knife and plane.

: Here in Holland they made wooden shoes of this material for ages.
: The more expensive wooden shoes are from willow.
: This poplar is very light.
: Between december and now I did not have any progress but you can
: see some pictures on http://www.ddaniels.com/dhwblog

: Greetings from Daan Daniels in The Netherlands

I suspect you have a different variety of poplar there than we have in the Great Lakes, or what they're selling on the west coast. Our poplar here is a very weak wood and comes nowhere close to WRC in strength. It's soft and easily dented, and doesn't sand all that well because it tends to get fuzzy. It planes and carves almost like basswood. As a cabinet maker we used it for trim that would have an opaque finish, but it was too soft to even use as a secondary wood for drawer boxes. I KNOW there are regional differences, though, so I'm only speaking for what we have around here.

m

Messages In This Thread

Strip: Albus wood strips *PIC*
riston -- 4/7/2010, 9:48 pm
Re: Strip: Albus wood strips
riston -- 4/8/2010, 4:12 pm
Re: Strip: Albus wood strips
Malcolm Schweizer -- 4/8/2010, 6:15 pm
Re: Strip: Albus wood strips
Bill Hamm -- 4/11/2010, 12:51 am
Re: Strip: Albus wood strips
Mike -- 4/8/2010, 8:38 pm
Re: Strip: Albus wood strips
Paul Montgomery -- 4/9/2010, 8:24 am
Re: Strip: Albus wood strips
Allan -- 4/8/2010, 5:01 pm
Re: Strip: Albus wood strips
dhwdaniels -- 4/8/2010, 6:02 pm
Re: Strip: The Two Poplars
Charlie -- 4/8/2010, 9:16 pm
Re: Strip: The Two Poplars
dhwdaniels -- 4/9/2010, 6:25 pm
Re: Strip: Albus wood strips
Mike Bielski -- 4/8/2010, 8:19 pm
Re: Strip: Albus wood strips
Ken Brunton -- 4/8/2010, 12:28 pm
Re: Strip: Albus wood strips
Mike Savage -- 4/8/2010, 2:20 pm
Re: Strip: Albus wood strips
Mike Bielski -- 4/8/2010, 9:24 am
Re: Strip: Albus wood strips
Bill Hamm -- 4/11/2010, 12:45 am
Re: Strip: Albus wood strips
Mike Bielski -- 4/8/2010, 9:26 am
Re: Strip: Albus wood strips
graybeard -- 4/8/2010, 1:59 pm
Re: Strip: Albus wood strips
Jay Babina -- 4/8/2010, 7:54 am
Re: Strip: Albus wood strips
Paul Montgomery -- 4/8/2010, 8:33 am
Re: Strip: Albus wood strips
Allan -- 4/8/2010, 2:02 am