Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Launching: Petrel "Fisheye"
By:jim meinecke
Date: 9/27/2011, 5:16 pm
In Response To: Re: Launching: Petrel "Fisheye" (Bob Johns)

my petrel sits a little high in front. I paddled Nick's At the meet at the beach last year and his rode the same way. The boat handle great you will love this boat

: First, the high bow. The measurement I see most often, and the one
: I use, is four inches from the paddler's back to the coaming.
: Somewhere in this area will bring your bow down. This will also
: make layback rolls a cinch.

: Second, tracking. Nick describes the Petrel as "a rough water
: play kayak". This kind of activity requires maneuverability
: which the Petrel has in spades. When this maneuverability is not
: required just drop your adjustable skeg. Nick has one on his
: Petrel. You can see the skeg control just under the cockpit
: here:
:
: http://www.guillemot-kayaks.com/guillemot/files/images/Petrel-Bow.jpg

: Anyone who can build a kayak as beautifully as you should have no
: problem adding an adjustable skeg.

: ~Bob

Messages In This Thread

Launching: Petrel "Fisheye" *PIC*
Rick Jensen -- 9/26/2011, 9:29 pm
Re: Launching: Petrel "Fisheye" *NM* *PIC*
Rick Jensen -- 9/26/2011, 9:38 pm
Re: Launching: Petrel "Fisheye" *PIC*
Rick Jensen -- 9/26/2011, 9:49 pm
Re: Launching: Petrel "Fisheye"
dave g -- 9/26/2011, 9:51 pm
Re: Launching: Petrel "Fisheye"
Bill Hamm -- 9/27/2011, 1:50 am
Re: Launching: Petrel "Fisheye"
Bob Johns -- 9/27/2011, 4:11 am
Re: Launching: Petrel "Fisheye"
jim meinecke -- 9/27/2011, 5:16 pm
Re: Launching: Petrel "Fisheye"
Etiennemuller Muller Ireland -- 9/27/2011, 4:15 am
Re: Launching: Petrel "Fisheye"
Mike Bielski -- 9/27/2011, 8:47 am
Re: Launching: Petrel "Fisheye"
Bryan Hansel -- 9/27/2011, 10:41 am
Re: Launching: Petrel "Fisheye"
Bill Hamm -- 9/28/2011, 2:50 am
Re: Launching: Petrel "Fisheye"
Sean D -- 9/28/2011, 7:35 am
Re: Launching: Petrel "Fisheye"
Bill Hamm -- 9/29/2011, 2:08 am