Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Please describe control cables
By:Mark Bodnar
Date: 8/26/1998, 6:03 pm
In Response To: Re: Please describe control cables (Tom Scheibe)

One other question - is the area just forward of your rudder watertight? You mentioned having an additional bulkhead to seal off the rudder area - is that because the rudder compartment in filled? or just at risk of getting wet?

Mark
>

> Actually pretty standard. Cables are connected to foot pedals
> and lines are run back through two bulkheads (one for storage, the
> second to isolate the rudder) to a horizontal support just below the
> sheer line, then hooked to a "T" connected to the rudder
> pin. Nearly the same setup as on any flip up rudder except everything
> is hidden beneath the removeable deck section.

> Tom

Messages In This Thread

integral rudder...again
Tom Scheibe -- 8/24/1998, 7:03 pm
Re: integral rudder... another question
Edgar Kleindinst -- 8/30/1998, 12:01 am
Re: integral rudder... another question
Nick Schade -- 8/31/1998, 5:51 pm
Re: integral rudder... another question
Edgar Kleindinst -- 9/4/1998, 5:29 pm
Re: integral rudder... another question
Tom Scheibe -- 8/31/1998, 2:18 pm
Re: integral rudder... another question
Joe Greenley -- 8/29/1998, 2:21 pm
Re: integral rudder... Dagger Atlantis
Mark Kanzler -- 8/31/1998, 12:07 am
Re: integral rudder on Dagger Sitka
Ross Leidy -- 9/1/1998, 1:54 pm
Please describe control cables
Pete Ford -- 8/25/1998, 7:47 pm
Re: Please describe control cables
Tom Scheibe -- 8/25/1998, 11:23 pm
Re: Please describe control cables
Mark Bodnar -- 8/26/1998, 6:03 pm
Re: Please describe control cables
Tom Scheibe -- 8/27/1998, 4:29 pm
Re: Please describe control cables
Mark Kanzler -- 8/27/1998, 6:55 pm
Re: Please describe control cables
Nolan Penney -- 8/28/1998, 6:49 am
Re: integral rudder...again
Nolan -- 8/25/1998, 6:46 am
Re: integral rudder...again
Tom Scheibe -- 8/25/1998, 4:36 pm
Re: integral rudder...again
Tom Scheibe -- 8/25/1998, 5:11 pm
Re: integral rudder...again
Nolan Penney -- 8/26/1998, 6:31 am
Re: integral rudder...again
Tom Scheibe -- 8/26/1998, 2:30 pm
Re: integral rudder...again
Nolan Penney -- 8/26/1998, 3:06 pm
Re: integral rudder...again
Mark Kanzler -- 8/28/1998, 12:07 am
Re: integral rudder...again
Nolan Penney -- 8/27/1998, 3:19 pm
Re: integral rudder...again
Mark Kanzler -- 8/27/1998, 7:09 pm
Re: integral rudder...again
Nolan Penney -- 8/28/1998, 7:05 am
Re: integral rudder...again
Mark Kanzler -- 8/28/1998, 11:08 am
Re: integral rudder...again
Nolan Penney -- 8/28/1998, 3:14 pm
Re: integral rudder...again
Mark Kanzler -- 8/29/1998, 10:55 am
Re: integral rudder...again
Mark Kanzler -- 8/28/1998, 10:59 am
Re: integral rudder...again
Nolan Penney -- 8/28/1998, 3:24 pm
Re: integral rudder...again
Mark Kanzler -- 8/29/1998, 11:10 am
Re: integral rudder...again
chris_rolt -- 8/28/1998, 7:14 pm
Re: integral rudder...again
Mark Kanzler -- 8/29/1998, 11:34 am
Re: integral rudder...again
Mark Kanzler -- 8/28/1998, 11:49 am
Re: New BBS Format
Mark Kanzler -- 8/27/1998, 7:14 pm
Re: integral rudder...again
Mark Kanzler -- 8/25/1998, 4:49 pm
A Picture - Rudder on a Cobra Kayak
Tom W. -- 8/25/1998, 3:19 pm
Re: A Picture - Rudder on a Cobra Kayak
Mark Kanzler -- 8/25/1998, 3:55 pm
Re: integral rudder...again
John Lange -- 8/25/1998, 1:01 pm
Re: Dagger Sitka Link
Mark Kanzler -- 8/25/1998, 3:52 pm
Re: Dagger Sitka Link
John Lange -- 8/25/1998, 4:25 pm
Re: Dagger Sitka Link
Mark Kanzler -- 8/25/1998, 4:37 pm
Re: 24' x 26"??
Wynne -- 8/27/1998, 3:04 pm
Re: 24' x 26"??
Mark Kanzler -- 8/27/1998, 7:21 pm
Re: integral rudder...again
Mark Kanzler -- 8/25/1998, 10:55 am
Re: Flow tank testing.
Mark Kanzler -- 8/24/1998, 8:37 pm