Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

2nd the Roller Motion
By:Pete Ford
Date: 10/27/1998, 4:43 pm
In Response To: Re: After filling the weave (Edgar Kleindinst)

I totally agree and have used the roller with foam brush wipe for 5 coats method with great success. You can also, using great care, use a cabinet scraper to take off drips - but if you roller thinly and then use the brush to take out the bubbles you will not get very many drips (if any).

Pete's Kayak Konstruction Zone

Messages In This Thread

After filling the weave
Bruce -- 10/26/1998, 9:16 pm
Re: After filling the weave
Nolan Penney -- 10/27/1998, 2:03 pm
Re: After filling the weave
Edgar Kleindinst -- 10/27/1998, 9:14 am
Re: After filling the weave
Robert Woodard -- 10/27/1998, 4:54 pm
Re: 1/8" Bristle rollers
Nick Schade -- 10/28/1998, 5:22 pm
Re: 1/8" Bristle rollers
Robert Woodard -- 10/28/1998, 5:41 pm
Re: 1/8" Bristle rollers
Philip Serra -- 11/4/1998, 12:28 am
Re: 1/8" Bristle rollers
Mark Kanzler -- 10/30/1998, 12:47 am
Re: 1/8" Bristle rollers
Nolan Penney -- 10/29/1998, 2:35 pm
2nd the Roller Motion
Pete Ford -- 10/27/1998, 4:43 pm
Re: After filling the weave
Brian C. -- 10/27/1998, 10:54 am
Re: After filling the weave
Mike Scarborough -- 10/26/1998, 9:57 pm
Re: After filling the weave
Bruce -- 10/27/1998, 9:54 pm