Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: 1/8" Bristle rollers
By:Robert Woodard
Date: 10/28/1998, 5:41 pm
In Response To: Re: 1/8" Bristle rollers (Nick Schade)

> You can get rollers made with the same short bristles as the trim
> painters. I find these rollers make fewere bubbles than the yellow foam
> epoxy rollers.

Cool. I'll have to look a little harder when it gets closer to that time for me (kit should be here friday). When I looked the other day all I saw was the foam and the traditional "knappy" paint rollers at the local hardware store. I may just have to try the pads anyway once and see how well they work.

Woody

Messages In This Thread

After filling the weave
Bruce -- 10/26/1998, 9:16 pm
Re: After filling the weave
Nolan Penney -- 10/27/1998, 2:03 pm
Re: After filling the weave
Edgar Kleindinst -- 10/27/1998, 9:14 am
Re: After filling the weave
Robert Woodard -- 10/27/1998, 4:54 pm
Re: 1/8" Bristle rollers
Nick Schade -- 10/28/1998, 5:22 pm
Re: 1/8" Bristle rollers
Robert Woodard -- 10/28/1998, 5:41 pm
Re: 1/8" Bristle rollers
Philip Serra -- 11/4/1998, 12:28 am
Re: 1/8" Bristle rollers
Mark Kanzler -- 10/30/1998, 12:47 am
Re: 1/8" Bristle rollers
Nolan Penney -- 10/29/1998, 2:35 pm
2nd the Roller Motion
Pete Ford -- 10/27/1998, 4:43 pm
Re: After filling the weave
Brian C. -- 10/27/1998, 10:54 am
Re: After filling the weave
Mike Scarborough -- 10/26/1998, 9:57 pm
Re: After filling the weave
Bruce -- 10/27/1998, 9:54 pm