Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Fiberglassing help
By:Bill Hamm
Date: 10/23/2007, 1:43 am
In Response To: Re: Epoxy: Fiberglassing help (Shaun)

: That would be great if it didn't smell, I might even be able to talk my
: parents into letting me fiberglass in the basement. Is that normal for
: epoxy not to smell? I have only done small fiberglass repair on sailboats,
: using a small container bought a hardware store, probably bondo, and it
: smells horribele... maybe polyester? But will epoxy based systems not
: really smell that bad?

Agree with Mike, polyester is what you've used and it's just awful smelling (walk into a professional boat builder's shop sometime when they are using it, ok don't ). Epoxy in comparison has almost no smell at all, your parents won't know you've used it unless you tell them :) (btw, tell them because like most chemical reactions you don't want them or you breathing the fumes until the chemical reaction is complete ie: the epoxy has cured).

Bill H.

Messages In This Thread

Epoxy: Fiberglassing help
Shaun -- 10/21/2007, 12:28 pm
Re: Epoxy: Fiberglassing help
Bob Kayes -- 10/22/2007, 4:36 pm
Re: Epoxy: Fiberglassing help
Shaun -- 10/22/2007, 6:22 pm
Re: Epoxy: Fiberglassing help *Pic*
Paul G. Jacobson -- 10/26/2007, 4:02 pm
Idea for basement tent ventilation
Robert N Pruden -- 10/31/2007, 8:34 pm
Re: Idea for basement tent ventilation
Paul G. Jacobson -- 11/1/2007, 11:41 am
Re: Epoxy: Fiberglassing help
charlie -- 10/24/2007, 7:55 pm
Re: Epoxy: Fiberglassing help
Bill Hamm -- 10/23/2007, 1:43 am
Re: Epoxy: Fiberglassing help
Tim -- 10/24/2007, 11:46 am
Re: Epoxy: Fiberglassing help
Mike Savage -- 10/22/2007, 7:02 pm
Re: Epoxy: Fiberglassing help *LINK*
Rob Macks / Laughing Loon -- 10/22/2007, 1:10 pm
Re: Epoxy: Fiberglassing help
Acors -- 10/22/2007, 9:24 am
Re: Epoxy: Fiberglassing help
Shaun -- 10/22/2007, 9:04 am
Have a garage? or rent one?
Jay Babina -- 10/22/2007, 8:27 am
Re: Epoxy: Fiberglassing help
Bill Hamm -- 10/22/2007, 1:51 am
Re: Epoxy: Fiberglassing help
Mike Savage -- 10/21/2007, 4:15 pm