Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Venturi Drains *LINK*
By:Mike Savage
Date: 11/17/2007, 11:10 am
In Response To: Re: Strip: Venturi Drains *Pic* (eric)

snip

: Like I said, the boat has to have buoyancy, and if you just drill a hole or
: two in the bottom, it will sink. Here's a Van Dusen kayak, which is a
: hybrid kayak with surfski style bucket. It has some sort of venturi style
: drain that I think you can actually close if you want.

: Eric

Hi Eric, and Mike,
That's a bit like the Topper self bailers, you can close them off when needed. Which is whenever the dinghy isn't moving, or going slowly.
Not sure if the topper ones would work in a kayak, they do need some speed to work, 3 knots plus, and they're about 10cm x 8cm area.
There's a good picture at this site, about a third of the way down the page.
http://www.wet-windy.co.uk/acatalog/Wet___Windy_Hull_Fitting__Screws__Nuts_and_Washers_42.html

Mike Savage
South West Cork

Messages In This Thread

Strip: Venturi Drains
Mike Wolfson -- 11/16/2007, 2:56 pm
A drain with a float. *LINK*
Donald -- 11/19/2007, 12:03 pm
Re: A drain with a float.
Mike Wolfson -- 11/19/2007, 3:17 pm
Re: A drain with a float. *LINK*
Dave G -- 11/19/2007, 3:53 pm
Re: A drain with a float.
Don Lucas -- 11/20/2007, 10:13 am
Re: A drain with a float.
Donald -- 11/19/2007, 3:38 pm
Re: Strip: Venturi Drains
Bill Hamm -- 11/18/2007, 6:58 am
Re: Strip: Venturi Drains
Kris Buttermore -- 11/19/2007, 11:19 am
Re: Strip: Venturi Drains
garland Reese -- 11/20/2007, 7:26 am
Re: Strip: Venturi Drains
Ken Brunton -- 11/16/2007, 7:31 pm
Re: Strip: Venturi Drains
Mike Wolfson -- 11/16/2007, 10:49 pm
Re: Strip: Venturi Drains *LINK*
Reg Lake -- 11/17/2007, 12:08 am
Re: Strip: Venturi Drains *Pic*
eric -- 11/16/2007, 6:34 pm
Re: Strip: Venturi Drains *LINK*
Mike Savage -- 11/17/2007, 11:10 am
Re: Strip: Venturi Drains *LINK*
eric -- 11/17/2007, 12:11 pm
Re: Strip: Venturi Drains
Nick Schade - Guillemot Kayaks -- 11/17/2007, 10:21 am
Re: Strip: Venturi Drains *LINK*
eric -- 11/16/2007, 6:38 pm
Re: Strip: Venturi Drains *LINK* *Pic*
Reg Lake -- 11/16/2007, 3:30 pm