Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Stripping Paint
By:Bill Hamm
Date: 12/4/2009, 11:06 am
In Response To: Re: Epoxy: Stripping Paint (danp)

: Red and blue not so good together - It was a good thick paint job
: and a bear to get through. I will be going two tone but using
: the original red combined with black. I have been looking into a
: penetrating epoxy, I've read it is higher in solvents to find
: it's way in pores and the spider cracks I will repair on the
: hull, then go with a marine paint for UV protection. I will be
: assisted by a local pro if I can get my money right.

: Thanks \\dp

Btw, black is by far the hardest color to use to cover problems.

Bill H.

Messages In This Thread

Epoxy: Stripping Paint
danp -- 12/2/2009, 9:03 pm
Re: Epoxy: Stripping Paint
Bill Hamm -- 12/3/2009, 4:03 am
Re: Epoxy: Stripping Paint
Brian Nystrom -- 12/3/2009, 7:04 am
Re: Epoxy: Stripping Paint
danp -- 12/3/2009, 11:08 am
Re: Epoxy: Stripping Paint
Bill Hamm -- 12/4/2009, 11:06 am
Re: Epoxy: Stripping Paint
Brian Nystrom -- 12/4/2009, 7:00 am
Re: Epoxy: Stripping Paint
danp -- 12/4/2009, 4:06 pm
Re: Epoxy: Stripping Paint
Bill Hamm -- 12/3/2009, 11:51 am
Re: Epoxy: Stripping Paint
danp -- 12/2/2009, 9:05 pm