: Hi Andrew,
: Bill mentioned out gassing into the glass weave.True,but you will
: also get bubbles coming from nowhere if you have a rising
: temperature whilst curing your seal coat.Do it in the evening as
: temperatures fall and the epoxy will instead,get sucked into the
: wood,I actually mean,get pushed in by atmospheric pressure, for
: you Physics types.
: cheers,from Paul, who, almost, found out the hard way.

Aha! This is probably why I never have bubble problems from outgassing...I always do the gluing in the evening or in the morning when the heater in the garage is keeping the temperature even. I probably read this somewhere years ago and just started doing it and stopped thinking about it consciously.

Robert N Pruden