Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Tools: Random Orbit Sander: OPM & Orbit size
By:Jay Babina
Date: 5/2/2002, 10:15 am
In Response To: Tools: Random Orbit Sander: OPM & Orbit size (Andreas)

Andreas - you mention spraying your last coat of varnish. Just be aware if you're not already that spraying is an artform. Having done both, I believe getting a good varnish job with a brush is a lot easier. With spraying you have to have the viscosity right on the money, your sprayer has to be in good condition - clean etc. the viscosity has to be right to melt on overspray and you have to know when enough is enough or you can get runs. Practice first if you haven't done it and are going to.

Messages In This Thread

Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/1/2002, 10:57 am
Re: Tools: Random Orbit Sander: OPM & Orbit size
Jay Babina -- 5/2/2002, 10:15 am
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/2/2002, 10:39 am
Re: Tools: Random Orbit Sander: OPM & Orbit size
Rob Macks -- 5/1/2002, 11:57 am
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/1/2002, 12:44 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/1/2002, 12:17 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Rob Macks -- 5/1/2002, 12:39 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Tom -- 5/1/2002, 5:04 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/1/2002, 12:49 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Rob Macks -- 5/1/2002, 3:05 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/1/2002, 4:27 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Rob Macks -- 5/1/2002, 6:25 pm
Re: Tools: Random Orbit Sander: OPM & Orbit size
Andreas -- 5/2/2002, 12:33 am
Re: Tools: Random Orbit Sander: OPM & Orbit size
Rob Macks -- 5/2/2002, 9:55 am