Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Ripping better strips
By:Bill Hamm
Date: 1/16/2011, 3:27 am
In Response To: Strip: Ripping better strips (Stephen Troy)

: I ripped my first 2x10x12' today (after quite a bit of practice on
: scrap), and ran into a few issues.

: My cuts on scrap weren't completely straight once I was handling a
: 12' board, so I decided to do 1/4" cuts and use the planer
: to bring them down to 3/16". As the imperfections added up,
: sections of a 1/4" strips approached 3/16". I'd plane
: down the high parts of the board's edge a bit, but eventually
: just flipped the board and worked from the other side. Is this
: the best way to go? No huge deal but I have a 2x12"
: tomorrow so flipping may not be the best option (I could always
: flip the board and then rip as many inches as the narrow) point.

: I'm wondering if a) the best way to improve cuts and b) how to
: clear up bad board edges.

Again not knowing what the saw in like, if you have long tables in front of and after the cut and the wood is dragging which it's prone to do specially with a heavy piece, might try a trick I've heard of and not tried, corn meal. Supposed to make sliding the wood on wood easier, sounds like it would work.

Bill H.

Messages In This Thread

Strip: Ripping better strips
Stephen Troy -- 1/15/2011, 11:29 pm
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 12:53 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:19 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 3:27 am
Re: Strip: Ripping better strips
Al Edie -- 1/16/2011, 3:38 am
Re: Strip: Ripping better strips
Bill Hamm -- 1/16/2011, 7:04 am
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 9:02 am
Re: Strip: Ripping better strips
Mike Savage -- 1/16/2011, 12:42 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 1:37 pm
Re: Strip: Ripping better strips
Ken Blanton -- 1/16/2011, 5:55 am
Re: Strip: Ripping better strips
Jay Babina -- 1/16/2011, 9:01 am
Re: Strip: Ripping better strips
Ian Cummins -- 1/16/2011, 5:08 pm
Re: Strip: Ripping better strips
Kurt Maurer -- 1/16/2011, 7:23 pm
Re: Strip: Zen
Ian Johnson -- 1/16/2011, 8:08 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 10:49 pm
Re: Strip: Ripping better strips
Tony Olsen -- 1/16/2011, 10:58 pm
Re: Strip: Ripping better strips
Kirk Fredericks -- 1/16/2011, 11:04 pm
Re: Strip: Ripping better strips
Paul G. Jacobson -- 1/16/2011, 9:10 pm
Re: Strip: Ripping better strips
Phil Nelson -- 1/16/2011, 10:03 pm
Re: Strip: Ripping better strips
ancient kayaker -- 1/18/2011, 10:39 am
Re: Strip: Ripping better strips
Phil Nelson -- 1/18/2011, 4:17 pm
Thanks all
Stephen Troy -- 1/17/2011, 12:31 am
Re: Thanks all
Paul G. Jacobson -- 1/17/2011, 4:02 am
Re: Thanks all
Bill Hamm -- 1/17/2011, 6:43 am
Featherboard use *PIC*
Paul G. Jacobson -- 1/17/2011, 6:50 pm
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 9:54 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:08 am
Re: Featherboard use
Les Cheeseman -- 1/20/2011, 11:28 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:13 am
Re: Featherboard use
Bill Hamm -- 1/20/2011, 10:32 am
Re: Thanks all
Les Cheeseman -- 1/19/2011, 9:18 am
Re: Thanks all
Bill Hamm -- 1/19/2011, 9:28 am
infeeed.outfeed table extensions.
Paul G. Jacobson -- 1/19/2011, 8:00 pm
And the picture for that is--- *PIC*
Paul G. Jacobson -- 1/19/2011, 8:06 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:52 pm
Re: And the picture for that is---
Bill Hamm -- 1/19/2011, 8:58 pm
Re: And the picture for that is---
Les Cheeseman -- 1/20/2011, 9:47 am
Re: And the picture for that is--- *PIC*
Etienne Muller - ireland -- 1/20/2011, 4:39 pm
Re: And the picture for that is---
Les Cheeseman -- 1/21/2011, 3:54 am
Re: Strip: Ripping better strips
Etienne Muller - ireland -- 1/17/2011, 5:07 am