Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Kayak Building Archive 1
| Topic | ||
|---|---|---|
 | Arctic Tern hits the pool! By: Chuck | 5/30/2000, 2:23 pm |
| Another double on the water - May 14 *Pic* By: Derek | 5/30/2000, 1:35 pm |
| Metal Skid Plates By: BillS | 5/30/2000, 1:08 pm |
| "ply-yak" visits a pond By: Tom Kurth | 5/29/2000, 10:35 pm |
| Puddles Under Glass Inside Hull By: Dwight | 5/29/2000, 6:49 pm |
| Fiberglassing the deck (part II) By: Marcelo | 5/29/2000, 9:41 am |
| Scarfs on Millcreek 13 By: BStruss | 5/29/2000, 8:10 am |
| Bean Bag Seats By: Nick Pinson | 5/29/2000, 6:02 am |
| Cheap Duct Tape By: Brian Wegener | 5/29/2000, 12:52 am |
| Wrapping The Coaming Lip By: Dwight Shelato | 5/28/2000, 10:48 pm |
| Glassing inside the hull.....help! By: Brandon | 5/28/2000, 10:30 pm |
| brads vs staples By: DAN MOSLANDER | 5/28/2000, 10:09 pm |
| loose ends By: Don | 5/28/2000, 7:36 pm |
| Coaming lip By: Larry C. | 5/28/2000, 5:19 pm |
| magic marker By: Doug | 5/28/2000, 4:25 pm |
| wet willy kayaks By: Karen | 5/28/2000, 1:24 pm |
| Out the door... By: Tim Stough | 5/28/2000, 1:17 pm |
| Glue Won't Stick By: Mike Nicholson | 5/27/2000, 11:20 pm |
| mounting a Feathercraft rudder By: George Parker | 5/27/2000, 9:30 pm |
| So close... *Pic* By: Don Bobzien | 5/27/2000, 10:20 am |
| Hull glassed, the end is near *Pic* By: Greg | 5/27/2000, 3:24 am |
| Glass cut tips for hull bottom? By: armin wendt | 5/27/2000, 1:25 am |
| Awesome Tool for Stitch & Glue Wiring By: Brion in Seattle | 5/26/2000, 10:30 pm |
| throw bags By: drew | 5/26/2000, 7:12 pm |
| Just Launched *Pic* By: Jeff Fine | 5/26/2000, 6:20 pm |
| Mystic, CT Wood Boat Show June 23-25 By: John B. | 5/26/2000, 6:03 pm |
| Great Auk By: John Schwab | 5/26/2000, 11:28 am |
| Home made wooden paddles? By: BStruss | 5/26/2000, 10:22 am |
| San Diego Wooden Boat Show June 17, 18 By: Randy Ames | 5/26/2000, 10:19 am |
| outer stem and stern By: Aime in vancouver | 5/26/2000, 9:34 am |
| What is the widest strip you have used? By: Jon | 5/25/2000, 3:49 pm |
| Hard at work?! *Pic* By: Shawn B | 5/25/2000, 2:43 pm |
| Guillemot OR Spring Run? By: Luus | 5/25/2000, 2:12 pm |
| Just a warning from the wise By: David Blodgett | 5/24/2000, 11:29 pm |
| PIONIER sails By: Rick Carlsen | 5/24/2000, 9:19 pm |
| "spooned" "dihedral" ??? By: G. Snapp | 5/24/2000, 6:25 pm |
| End pours and hull-deck fit By: David | 5/24/2000, 3:32 pm |
| Band saw blade for cutting strips By: Andreas Albat | 5/24/2000, 2:58 pm |
| Additionn to ring By: Ed Walshe - Dublin Ireland | 5/24/2000, 6:22 am |
| CLC Patuxent 17.5 vs. ? By: Grant | 5/23/2000, 3:49 pm |
| Building rowing shells By: Steve K | 5/23/2000, 12:32 pm |
| glass taping deck to hull hints?? By: pete czerpak | 5/23/2000, 9:53 am |
| hatch cover upgrade? By: Brandon | 5/23/2000, 2:17 am |
| Building from scratch By: Lee | 5/22/2000, 11:18 pm |
| hard-chine edges By: Tom Kurth | 5/22/2000, 11:00 pm |
| layers of glass? By: Don | 5/22/2000, 10:53 pm |
| Patch hole/ remove stripped screw By: Steve Murch | 5/22/2000, 10:37 pm |
| Re: LEARN TO READ MSDS's By: lee | 5/22/2000, 10:22 pm |
| Re: LEARN TO READ MSDS's By: Dean Trexel | 5/22/2000, 9:53 pm |
| Outer Island really does roll itself! By: Dean Trexel | 5/22/2000, 8:28 pm |
| Glassing the inside hull of a Pygmy Boat By: David | 5/22/2000, 7:04 pm |
| End forms on the Guillemot single By: Rick | 5/22/2000, 4:39 pm |
| Clear coat over epoxy By: WA Joe | 5/22/2000, 2:48 pm |
| Minicel Foam By: Kyle Knop | 5/22/2000, 1:17 pm |
| using purpleheart?? By: pete czerpak | 5/22/2000, 12:41 pm |
| Applying 'Glass By: Ken Finger | 5/22/2000, 10:44 am |
| Bulkheads By: Doug Kuik | 5/22/2000, 10:44 am |
| Freezing Epoxy - It Worked! (so far) By: Tim Stough | 5/22/2000, 1:05 am |
| I had to peel off the glass! By: Marcelo | 5/21/2000, 8:41 pm |
| Kayak parts too long? *Pic* By: Charles Cooper | 5/21/2000, 7:57 pm |
| This took all the Guts I could muster . . . *Pic* By: Spidey | 5/21/2000, 5:21 pm |
| glassing problem By: Ron Larson | 5/21/2000, 5:11 pm |
| Tips, Tricks and Hints for aligning hull By: Ed | 5/21/2000, 5:04 pm |
| epoxy on my ribs By: Warren | 5/21/2000, 3:20 pm |
| Outer Island completed -- Finally! By: Dean Trexel | 5/20/2000, 11:37 pm |
| Fairing - high build primer or epoxy & fillers? By: Chris in Cajun Country | 5/20/2000, 11:16 pm |
| Lightweight End Pours By: Bruce | 5/20/2000, 9:37 pm |
| end pour warning By: ross beare | 5/20/2000, 9:08 pm |
| Balsa Wood By: Vinmal245 | 5/20/2000, 8:05 pm |
| Closed Cell Foam Buying Location? By: Brion | 5/20/2000, 7:59 pm |
| Rudder? By: Heather | 5/20/2000, 1:59 am |
| choosing a kayak By: MB Faulkner | 5/19/2000, 9:17 pm |
| plainweave By: Tom Kurth | 5/19/2000, 8:38 pm |
| Non-allergenic epoxies? By: Doug Kuik | 5/19/2000, 7:16 pm |
| Sanding. By: Levent Seker | 5/19/2000, 10:47 am |
| Squirt boats By: Edward | 5/19/2000, 8:03 am |
| 1/8" Lauan source By: David | 5/18/2000, 11:34 pm |
| Hatch gasket question By: larry | 5/18/2000, 8:49 pm |
| Posting Pictures By: Doyle | 5/18/2000, 1:00 pm |
| Non-allergenic Epoxy By: Doug Kuik | 5/18/2000, 12:50 pm |
| Foot Brace Mounting - What do you think? *Pic* By: Tim Stough | 5/18/2000, 11:58 am |
| Redwood Guillemot Double reaches the water May 14 *Pic* By: Steve in San Diego | 5/18/2000, 12:14 am |
| Sanding after staining By: Bill H. | 5/17/2000, 9:49 pm |
| Arctic Tern foot pegs By: Michael Brokenshire | 5/17/2000, 7:06 pm |
| Re: Risk v precautions By: Dean Trexel | 5/17/2000, 5:12 pm |
| Kayak Trolling Setup By: Nick Pinson | 5/17/2000, 2:33 pm |
| Flotation Foam By: Chris Dore | 5/17/2000, 1:13 pm |
| System 3 Hull Paint (Repost) By: Larry Pfisterer | 5/17/2000, 12:29 pm |
| AquaSub - OT *Pic* By: Spidey | 5/17/2000, 1:13 am |
| ultralight BB By: Buzz | 5/16/2000, 11:22 pm |
| Ultra-low volume kayaks By: Berkeley C. | 5/16/2000, 6:49 pm |
| Paddles *Pic* By: Greg Hicks | 5/16/2000, 3:27 pm |
| skin boat coatings By: Jay Babina | 5/16/2000, 10:26 am |
| Merganser in the Water!! By: Greg Hicks | 5/16/2000, 9:19 am |
| sanding out small indentations between strips By: Peter Patel-Schneider | 5/16/2000, 6:17 am |
| Spectre By: steve Koscica | 5/16/2000, 1:02 am |
| info on tribalance kayak By: Paul Hunter Jr. | 5/15/2000, 5:31 pm |
| Just say "No" to NBS By: Shawn B | 5/15/2000, 4:50 pm |
| Ouch my poor boat By: Jack Sanderson | 5/15/2000, 4:31 pm |
| Another maiden launch By: Peter H | 5/15/2000, 11:49 am |
| Varnish shelf life By: Steve | 5/15/2000, 10:38 am |
| sailing rig By: Brandon | 5/14/2000, 7:18 pm |
| cockpit customizing By: Ken Sutherland | 5/14/2000, 5:39 pm |
| printed fabric use in fiberglass By: BRETT ONNINK | 5/14/2000, 3:14 pm |
| finaly got it out in some large chop By: David Blodgett | 5/14/2000, 12:03 pm |
| Outer Island gets baptized By: Dean Trexel | 5/13/2000, 9:07 pm |
| Pinholes in final sanding By: Dean Trexel | 5/13/2000, 8:30 pm |
| Another source (online) for boatbuilding books By: Paul G. Jacobson | 5/13/2000, 8:09 pm |
| Dust Control By: Roger Nuffer | 5/13/2000, 5:39 pm |
| Spare Paddle By: David Bryson | 5/13/2000, 7:55 am |
| Exp Single w/ me By: Dave Colant | 5/12/2000, 11:17 pm |
| Exp Single w/ wooden seat (pic) *Pic* By: Dave Colant | 5/12/2000, 10:51 pm |
| Pickup shell By: Don Bowen | 5/12/2000, 7:15 pm |
| More pixs of Redbird *Pic* By: Travis | 5/12/2000, 2:59 pm |
| Take Canoe HOME from Work Day *Pic* By: Travis | 5/12/2000, 2:54 pm |
| Smoothing inside of hull By: Tim Shelburne | 5/12/2000, 2:15 pm |
| System 3 Hull Paint By: Larry Pfisterer | 5/12/2000, 1:15 pm |
| New Builder By: RogerP | 5/12/2000, 12:05 pm |
| To stain or not to stain By: Bill H. | 5/12/2000, 12:02 pm |
| Baidarka triple plans By: Kevin Stout | 5/12/2000, 11:35 am |
| New builder By: RogerP | 5/12/2000, 10:24 am |
| One of Nick's S&G's is born *Pic* By: Matthew Bastian | 5/12/2000, 10:19 am |
| Some New Deck Progress *Pic* By: Spidey | 5/12/2000, 2:02 am |
| expedition single for the lady By: Brandon Nelson | 5/12/2000, 12:34 am |
| Heatshrink dacron By: Gary Pick | 5/11/2000, 11:52 pm |
| Ultra light skin on frame kayak By: Dale Frolander | 5/11/2000, 9:33 pm |
| Some more pics...a canoe shelf *Pic* By: Doug K | 5/11/2000, 8:04 pm |
| Going with 2-part poly clear By: Dean Trexel | 5/11/2000, 6:50 pm |
| Deck Stripping Question By: Don Bobzien | 5/11/2000, 12:10 pm |
| Strange shine in my pine By: Shawn B | 5/11/2000, 11:45 am |
| layup variation By: Greg | 5/11/2000, 2:05 am |
| He has a point there *Pic* By: Warren | 5/10/2000, 11:51 pm |
| The Point *Pic* By: Warren | 5/10/2000, 11:46 pm |
| "Big Butts Up The River..." By: James Neely | 5/10/2000, 9:35 pm |
| blotches after first epoxy coat By: Addison M. | 5/10/2000, 5:57 pm |
| Varnish or drill first By: Wayne R. | 5/10/2000, 6:05 am |
| Either Fish or Cut Strips! *Pic* By: Joe Greenley | 5/10/2000, 2:57 am |
| Sanded Too Far?? By: Jim Owens | 5/10/2000, 12:21 am |
| 'glass types By: Rick Lawler | 5/9/2000, 9:41 pm |
| Wet Sanding By: Mike Mallabar | 5/9/2000, 12:10 pm |
| Plans for first wood-strip double seater kayak By: RB | 5/9/2000, 11:45 am |
| Finally started glassing the Guillemot 18 By: Shawn B | 5/9/2000, 11:42 am |
| loss of feet blood circulation - why ? By: Erez | 5/9/2000, 2:08 am |
| dooky smutz By: Ray Port Angeles | 5/9/2000, 12:37 am |
| Kayak / Canoe / Bike Trailer *Pic* By: Larry Thompson | 5/8/2000, 11:21 pm |
| bilge pump By: LARRY OBENSHAIN | 5/8/2000, 10:09 pm |
| Pygmy vs clc By: Reed | 5/8/2000, 9:57 pm |
| Another Lauan question By: BStruss | 5/8/2000, 7:33 pm |
| Finally Done and paddled! *Pic* By: Kent LeBoutillier | 5/8/2000, 6:18 pm |
| Varnish to Water how long? By: Travis | 5/8/2000, 5:27 pm |
| design program By: david | 5/8/2000, 1:16 pm |
| Kayak Time Warp MP3 (w/LInks) By: Spidey | 5/7/2000, 11:47 pm |
| Can't Help Myself By: Warren | 5/7/2000, 11:37 pm |
| Yak Packin' or Kayak Cratin' :-) By: Tim Stough | 5/7/2000, 11:21 pm |
| anyone have expierience with bi/triaxials? By: David Blodgett | 5/7/2000, 7:13 pm |
| kayak covers By: Quent | 5/7/2000, 7:10 pm |
| UK Hand Tools? By: Nick Pinson | 5/7/2000, 5:46 pm |
| Hatch Lip Question By: Don Bobzien | 5/7/2000, 10:21 am |
| stitch and glue expedition single By: Brandon Nelson | 5/7/2000, 1:14 am |
| Ready to tape seams (How much 'Poxy?) By: Bill Jankowski | 5/6/2000, 11:39 pm |
| Great Lakes Small Craft Symosium 3 By: Gerald McQuinn | 5/6/2000, 10:31 am |
| CDN source of Captain's varnish By: Chris | 5/6/2000, 1:43 am |
| A bunch of pics................ By: Doug K | 5/6/2000, 12:59 am |
| There comes a time in every builders career.... By: Doug K | 5/6/2000, 12:30 am |
| more questions By: Tom Kurth | 5/5/2000, 10:50 pm |
| RAKA questions By: Tom Kurth | 5/4/2000, 11:56 pm |
| Epoxy 101 By: Jack Martin | 5/4/2000, 11:12 pm |
| Advice? Drilling Thru the Bow and Stern End Pours By: Tim Stough | 5/4/2000, 5:11 pm |
| I LOVE YOU VIRUS -- It's REAL - please read By: Brian T. Cunningham | 5/4/2000, 4:31 pm |
| Wood-strip canoe: Splitting the wood ect. Advice? By: Anne G | 5/4/2000, 1:19 pm |
| Sail, rudder (Keel?) ideas for colaspeable Kayak *Pic* By: Gene Bowley | 5/4/2000, 1:16 pm |
| ROS on Stearates? By: Doug | 5/4/2000, 11:54 am |
| Many thanks By: Spencer A. Smith | 5/3/2000, 8:12 pm |
| boat turns left - NO MORE By: David Walker | 5/3/2000, 7:09 pm |
| Spray Skirt By: mike | 5/3/2000, 10:01 am |
| GPS users By: Kent LeBoutillier | 5/3/2000, 6:15 am |
| Expedition Single & weathercocking - Followup By: Dave Colant | 5/2/2000, 4:56 pm |
| Guillemot 18 almost ready for fiberglass *Pic* By: Shawn B | 5/2/2000, 3:31 pm |
| cockpit heights. By: Wayne Prouty | 5/2/2000, 2:02 pm |
| merganser finally started- no pics though By: pete czerpak | 5/2/2000, 12:02 pm |
| Almost done! *Pic* By: Kent LeBoutillier | 5/2/2000, 8:03 am |
| Hollow loom Greenland paddle *Pic* By: Kent LeBoutillier | 5/2/2000, 7:47 am |
| Pore epoxy cure update: Pic Link By: Roger Nuffer | 5/2/2000, 3:30 am |
| aft deck *Pic* By: Dean Trexel | 5/1/2000, 9:39 pm |
| foredeck *Pic* By: Dean Trexel | 5/1/2000, 9:31 pm |
| coaming lip (out of order) *Pic* By: Dean Trexel | 5/1/2000, 9:24 pm |
| artistic liberties *Pic* By: Dean Trexel | 5/1/2000, 9:21 pm |
| coaming riser *Pic* By: Dean Trexel | 5/1/2000, 9:14 pm |
| more pix - epoxying inner shear *Pic* By: Dean Trexel | 5/1/2000, 9:07 pm |
| sealing bulkheads By: craig | 5/1/2000, 5:16 pm |
| Building a Skin and Frame By: Anne G | 5/1/2000, 5:16 pm |
| footpeg height By: Dean Trexel | 5/1/2000, 3:03 pm |
| Painting a plywood/canvas kayak By: Gene Bowley | 5/1/2000, 1:26 pm |
| Geodesic Aerolite *Pic* *Pic* By: David | 5/1/2000, 9:34 am |
| Substitue for rice paper. By: Dale Frolander | 5/1/2000, 3:13 am |
| Finally some picutures! *Pic* By: Dean Trexel | 4/30/2000, 9:36 pm |
| Another (S&G) hits the water *Pic* By: Dave Murphy | 4/30/2000, 8:22 pm |
| THE TROPICALIZED BAIDARKA By: mark c. williams | 4/30/2000, 7:57 pm |
| Epoxy Thinner By: Randy Ames | 4/30/2000, 7:49 pm |
| Greenland Paddles By: Nick Pinson | 4/30/2000, 6:41 pm |
| Weathercocking and Knee Braces By: David Bryson | 4/30/2000, 5:17 pm |
| Photos of deck mounted footbrace *Pic* By: Eric Schade (Shearwater Boats) | 4/30/2000, 1:10 pm |
| Slippery cockpit floor By: Liz Leedham | 4/30/2000, 9:36 am |
| can it be done? By: David Blodgett | 4/30/2000, 12:06 am |
| Great Lakes Small Craft Symosium 3 By: Gerald McQuinn | 4/29/2000, 5:28 pm |
| done sanding before varnishing? By: Tom Schwartzman | 4/29/2000, 3:56 pm |
| Miscellaneous questions By: Nancy | 4/29/2000, 3:25 pm |
| 1-part polyurethane varnish By: Dean Trexel | 4/29/2000, 2:06 pm |
| Footbrace Mounting By: Dennis | 4/29/2000, 11:10 am |
| posting photos through free e-mail service By: Paul G. Jacobson | 4/29/2000, 5:54 am |
| Oar length for small wooden boats By: Lisle Posey | 4/28/2000, 2:25 pm |
| Fixing a scratch By: Don Beale | 4/28/2000, 1:14 pm |
| Titebond II wood glue By: Chuck W. | 4/28/2000, 12:18 pm |
| Router bits By: Michel Daneault | 4/27/2000, 10:08 pm |
| surf kayaks By: thomas andrews | 4/27/2000, 8:14 pm |
| Another Newbie question By: Ed Gandorf | 4/27/2000, 1:58 pm |
| I think I have built a tank By: Brian B | 4/27/2000, 11:31 am |
| Reinforcing Greenland paddle ends By: Spencer A. Smith | 4/26/2000, 9:21 pm |
| Sources for Z-Spar Flagship By: Chuck | 4/26/2000, 1:35 pm |
| Varnish vs. Polyester Resin By: Doyle | 4/26/2000, 1:09 pm |
| central NY plywood source?? By: pete czerpak | 4/26/2000, 11:45 am |
| Doubled Progress update. By: Derek | 4/26/2000, 11:04 am |
| glues for stick and glue By: Kristopher | 4/26/2000, 3:01 am |
| Product called 303 Anybody use it? By: Bill Heuser | 4/25/2000, 10:04 pm |
| Tall Farmer John Wetsuits? By: G. Snapp | 4/25/2000, 7:40 pm |
| Plywood Bulkheads By: DaveW | 4/25/2000, 6:20 pm |
| Posting a PIC if you have no URL By: Marcelo | 4/25/2000, 9:23 am |
| Great tips for joining top to bottom By: Brian B | 4/25/2000, 8:44 am |
| Guillemot cockpit coaming lip height By: Ed Walshe - Dublin Ireland | 4/25/2000, 6:28 am |
| I've got a dilemna By: David Blodgett | 4/24/2000, 10:23 pm |
| Building a long kayak *Pic* By: Nick Schade - Guillemot Kayaks | 4/24/2000, 5:43 pm |
| A Kayak in a Weekend *Pic* By: BillS | 4/24/2000, 5:06 pm |
| Fiberglass specs By: Don Hummels | 4/24/2000, 4:28 pm |
| polyurathane glue for kayak building? By: Kristopher | 4/24/2000, 12:41 pm |
| Timely varnish question! By: Lew Crenshaw | 4/24/2000, 10:39 am |
| Any rib-benders in here? By: timfish | 4/23/2000, 10:16 pm |
| Traditional By: Eric | 4/23/2000, 9:20 pm |
| Guillemot rudder By: Warren | 4/23/2000, 8:30 pm |
| Ever scaled down a design? By: Jason A. | 4/23/2000, 8:23 pm |
| Proper gluing technique- OT By: Bruce | 4/23/2000, 7:58 pm |
| Re: Just had too look ...Twice !! By: Rehd | 4/23/2000, 5:02 pm |
| Re: point? By: lee | 4/23/2000, 1:25 pm |
| Gunwale attachment settled? By: Travis | 4/23/2000, 1:17 pm |
| Epoxy - RAKA/SYS3/WEST etc... By: k ingersoll | 4/23/2000, 12:43 pm |
| Level Strongback By: B J | 4/23/2000, 11:23 am |
| Wavy plywood problem By: gary b. | 4/23/2000, 10:58 am |
| Dale - Easter Massacre - 3g or Building Board? By: Spidey | 4/23/2000, 2:19 am |
| Cedar strip kayak on ebay By: Dale Frolander | 4/23/2000, 2:05 am |
| rehd, what are we doing on sunday ? By: Erez | 4/22/2000, 10:31 pm |
| questions about BWCA & kayak carts By: Erez | 4/22/2000, 10:22 pm |
| Varnish amount By: Travis | 4/22/2000, 8:56 pm |
| How do you guys shape paddle blades? By: tim | 4/22/2000, 3:44 pm |
| Kayak trailer *Pic* By: Matt | 4/22/2000, 9:05 am |
| Steamy questions By: Simon | 4/22/2000, 6:02 am |
| Varnish prep question: Thanks in advance By: larry | 4/21/2000, 10:35 pm |
| Advice on northern cedar By: Mark R. | 4/21/2000, 6:14 pm |
| checkering By: Allston Crawford | 4/21/2000, 4:45 pm |
| planing By: Aime Oteman | 4/21/2000, 4:40 pm |
| NEED HELP ON HOW TO MAKE A LIGHT CLONE By: LEW FOX | 4/21/2000, 10:26 am |
| Kayaking Safety By: Bruce | 4/20/2000, 7:12 pm |
| adjustable foot braces By: Fred Williams | 4/20/2000, 5:20 pm |
| the Guillemot's handling characteristics?? By: Hank | 4/20/2000, 10:53 am |
| Safety, two points By: Nolan | 4/20/2000, 9:32 am |
| Smaller loop deck fitting By: Ross Leidy | 4/20/2000, 9:01 am |
| Three Cheers for MAS By: Tim | 4/20/2000, 2:29 am |
| help with spray skirt for coho By: erez | 4/20/2000, 1:43 am |
| Prospecting By: Ryan Arnold | 4/20/2000, 12:45 am |
| Choosing a seat By: Bruce | 4/19/2000, 10:26 pm |
| Fiberglass: 4oz. v 6oz. By: Scott | 4/19/2000, 7:07 pm |
| Expedition Single & weathercocking By: Dave Colant | 4/19/2000, 3:52 pm |
| Okoume vs. other woods By: Brian Nystrom | 4/19/2000, 2:52 pm |
| Fiberglass Part II By: Scott | 4/19/2000, 1:22 pm |
| Not a flame George, just a question... By: Mike T. | 4/19/2000, 12:27 pm |
| Marine ply for hull By: Bailey | 4/19/2000, 10:05 am |
| Airbrushing By: Paul | 4/19/2000, 9:30 am |
| wood for stripper (boat) in NE By: Jason W. | 4/19/2000, 9:22 am |
| bad kayak building karma- no wood,glass delivery y By: pete czerpak | 4/19/2000, 8:08 am |
| Re: off topic, wow, weekend warrior analogies? By: lee | 4/19/2000, 5:19 am |
| Fiberglass Specs. By: Scott | 4/19/2000, 4:40 am |
| Re:off topic By: lee | 4/19/2000, 4:32 am |
| Merganser By: Bill H. | 4/18/2000, 11:22 pm |
| Re: Review v. Directed Question By: Larry Thompson | 4/18/2000, 11:16 pm |
| George, is that your best work? By: Bruce | 4/18/2000, 10:42 pm |
| Re: Review v. Directed Question By: Jay Roberts | 4/18/2000, 10:01 pm |
| Re: Mmmmmpphhhh! *NM* By: Spidey | 4/18/2000, 7:19 pm |
| Re: Review v. Directed Question By: Dennis | 4/18/2000, 6:52 pm |
| Re: Review v. Directed Question By: Dean Trexel | 4/18/2000, 5:51 pm |
| Spring Run Review?? By: Nick Pinson | 4/18/2000, 5:26 pm |
| Re: Review v. Directed Question By: Ross Leidy | 4/18/2000, 4:40 pm |
| narrowing b&c strips By: John Waddington | 4/18/2000, 1:54 pm |
| Epoxy sensitization By: John Michne | 4/18/2000, 9:25 am |
| settings,paddles,symposium,no-see-ums By: lee | 4/18/2000, 8:36 am |
| Nick, are you messin' round again!! By: Ian Johnston | 4/18/2000, 2:02 am |
| How do I clean clay marks off boat? By: David Walker | 4/18/2000, 1:09 am |
| Alternative Stapleless?? (New Product) By: Spidey | 4/17/2000, 9:30 pm |
| fiberglassing & portholes By: AMANDA | 4/17/2000, 7:37 pm |
| Row/Paddle By: Kenny B | 4/17/2000, 7:32 pm |
| 1000 island destinations help??? By: pete czerpak | 4/17/2000, 2:58 pm |
| Prepping for Varnish By: Chuck | 4/17/2000, 2:12 pm |
| Another one hits the water!! By: Ed Coon | 4/17/2000, 1:14 pm |
| Time to Build? - Wee Lassie By: Greg Hicks | 4/17/2000, 12:35 pm |
| Minnesota-Twin Cities By: mike | 4/17/2000, 12:22 pm |
| Laminated Ash deck fittings By: Ross Leidy | 4/17/2000, 9:10 am |
| Tern Builders - advice please By: Mike | 4/17/2000, 12:22 am |
| 83 leetle blocks By: Dean Trexel | 4/16/2000, 10:51 pm |
| Message Threader By: Nick Pinson | 4/16/2000, 6:00 pm |
| Chris Choi's New Outer Islander By: Nick Schade - Guillemot Kayaks | 4/16/2000, 5:55 pm |
| How much sanding?? By: Walter H. Klaus | 4/16/2000, 7:51 am |
| wood species delaminating from apoxy, By: Rick Clements | 4/16/2000, 2:53 am |
| colored fillets? By: Johnnie | 4/16/2000, 12:04 am |
| Re: Just have to ask ... By: Nolan | 4/15/2000, 8:44 pm |
| Re: Defense of George's methods - examples By: Nolan | 4/15/2000, 8:42 pm |
| Hey Paul Williams - Addt'l info on syringe needles By: Scott | 4/15/2000, 4:01 pm |
| Deck fitting - photo By: Ross Leidy | 4/15/2000, 3:59 pm |
| Epoxy sensitive By: Bill | 4/15/2000, 12:18 am |
| RAKA opinions By: Dean Trexel | 4/14/2000, 9:35 pm |
| Aaarrgh! $19000 and one tie-down! By: Dean Trexel | 4/14/2000, 9:07 pm |
| Shear seam fitup By: Kent Leboutillier | 4/14/2000, 8:18 pm |
| Re: Euler-Stokes equations By: Spidey | 4/14/2000, 7:43 pm |
| Drilling holes in a perfectly good kayak By: Ross Leidy | 4/14/2000, 3:29 pm |
| Wooden Boat Show By: Jack Martin | 4/14/2000, 10:03 am |
| Mike Hanks' Plywood Walrus Pics By: Curt Hanks | 4/14/2000, 1:49 am |
| need help with alligators risk info By: erez | 4/14/2000, 12:16 am |
| Cool yack rack for pickups By: Tim | 4/13/2000, 11:01 pm |
| What do yall think of this layup? By: David Blodgett | 4/13/2000, 10:03 pm |
| ROS vs Sheet Sanders By: Paul Willliams | 4/13/2000, 8:35 pm |
| Silicone, Epoxy, and Plastic Wrap By: Mike Hanks | 4/13/2000, 4:02 pm |
| Guillemot Coaming--I need a measurement By: Shawn Baker | 4/13/2000, 11:02 am |
| Defense of George's methods - examples By: Dean Trexel | 4/13/2000, 10:24 am |
| how long before sanding? By: Dean Trexel | 4/13/2000, 7:43 am |
| Radial Arm Saw Hint By: Spidey | 4/12/2000, 11:03 pm |
| taping inside seam of strip kayak By: dave ingham | 4/12/2000, 6:46 pm |
| Boat Finishing Questions (paint, varnish, etc.) By: Tim Stough | 4/12/2000, 6:07 pm |
| Wood Veneer Sources? Building Ross Leidy Cradles By: Tim Stough | 4/12/2000, 3:21 pm |
| First Form. HELP By: Wayne P. | 4/12/2000, 12:55 pm |
| Whitewater kayaks By: Hunter | 4/12/2000, 12:46 pm |
| Poor cure with epoxy By: Roger Nuffer | 4/11/2000, 10:56 pm |
| Mineral Spirits? By: Dale Frolander | 4/11/2000, 10:24 pm |
| A new angle on Scary Sharp By: Dave Houser | 4/11/2000, 9:49 pm |
| The Key to stapless construction / pic By: Rick thomas | 4/11/2000, 7:21 pm |
| stain By: john mayer | 4/11/2000, 6:03 pm |
| putting a project on hold... By: Walter S. | 4/11/2000, 5:28 pm |
| How long? By: DJ Gaker | 4/11/2000, 3:59 pm |
| Mix glass/epoxy By: Hans Friedel | 4/11/2000, 3:16 pm |
| How many hours? By: R. Sweeney | 4/11/2000, 1:46 pm |
| how to get rid of wax. By: Derek | 4/11/2000, 12:32 pm |
| Re: Please don't put words in others mouth By: Nick Schade - Guillemot Kayaks | 4/11/2000, 11:45 am |
| Deck Fittings Decisions By: Fritz OConnor | 4/11/2000, 11:03 am |
| How 2 build a ten ft kayak By: Hank Rodgers | 4/11/2000, 10:17 am |
| Epoxy and Silicone By: Mike Hanks | 4/11/2000, 9:49 am |
| Can you use Cloth for covering? By: blaine | 4/11/2000, 9:06 am |
| Re: Sorry for popping off . . . By: Spidey | 4/11/2000, 12:23 am |
| Re: scaling By: lee | 4/10/2000, 10:39 pm |
| Re: to what purpose By: lee | 4/10/2000, 10:01 pm |
| Re: Whooooaaaaa, George . . . By: Spidey | 4/10/2000, 8:21 pm |
| Source for cedar in Los Angeles? By: Ed Winterhalter | 4/10/2000, 6:50 pm |
| Thwart designs? By: Travis | 4/10/2000, 6:20 pm |
| Strip Design Tool #2 By: mike allen ---} | 4/10/2000, 4:26 pm |
| unfolding stitch 'n glue kayak drawings By: Darren Neff | 4/10/2000, 3:31 pm |
| Custom seats By: Derek | 4/10/2000, 3:07 pm |
| Free ... By: Mike R. | 4/10/2000, 1:23 pm |
| Free CLC Cape Charles Kayak By: Steve Gersh | 4/10/2000, 2:01 am |
| Kayak Building Classes By: Cindy Farber | 4/9/2000, 10:58 pm |
| pvc skins By: Paul Raymond | 4/9/2000, 10:26 pm |
| Deck Construction Started By: Spidey | 4/9/2000, 9:57 pm |
| project idea... will it work? By: David Blodgett | 4/9/2000, 9:25 pm |
| Compass for Arctic Tern By: Fritz OConnor | 4/9/2000, 8:16 pm |
| Re: Wow - It was easy to build! (Photo) By: Spidey | 4/9/2000, 7:31 pm |
| stitch and glue By: John Gardiner | 4/9/2000, 3:34 pm |
| Stapleless construction of Wee Lassie By: Walter H. Klaus | 4/9/2000, 2:51 pm |
| Thanks and a question for George By: Brian Nystrom | 4/9/2000, 10:41 am |
| cloth By: john mayer | 4/8/2000, 9:06 pm |
| Re: Bungee/webbing sources...and VELCRO By: Dean Trexel | 4/8/2000, 8:53 pm |
| Re: Interpretation needed By: Dean Trexel | 4/8/2000, 8:34 pm |
| Flush Rigging & Laminating Paper (scan) By: Spidey | 4/8/2000, 6:52 pm |
| Anyone here build a Panache? By: Mark R | 4/8/2000, 6:14 pm |
| Sligthly off topic: Building a Chris C runabout By: Marcelo | 4/8/2000, 4:04 pm |
| Kayak outrigger hulls By: Dana Jones | 4/8/2000, 3:58 pm |
| Re: Free ... By: Ross Leidy | 4/8/2000, 3:37 pm |
| Great Lakes Small Craft Symposium 3 By: Gerald McQuinn | 4/8/2000, 1:01 pm |
| question for Ross By: Jay Roberts | 4/8/2000, 9:26 am |
| Started a Great Auk By: Simon | 4/8/2000, 5:13 am |
| door skins By: roddy | 4/8/2000, 12:10 am |
| Spidey By: Jason | 4/7/2000, 9:53 pm |
| R.O. Sanders By: Dennis | 4/7/2000, 8:46 pm |
| Has anyone built a Great Auk 14? By: Brian Nystrom | 4/7/2000, 6:24 pm |
| Bungee/webbing sources By: Terry | 4/7/2000, 12:58 pm |
| Rub it in, rub it in. By: Dale Frolander | 4/7/2000, 4:45 am |
| Canvas Canoe By: Franco Sotgiu | 4/7/2000, 3:08 am |
| Bulkheads By: Tim | 4/6/2000, 8:46 pm |
| Web site done By: John Michne | 4/6/2000, 8:36 pm |
| How to dye pants red??? By: Sandy Garrett | 4/6/2000, 6:48 pm |
| Car Top carriers By: Derek | 4/6/2000, 1:43 pm |
| Varnish Question By: Larry Thompson | 4/6/2000, 1:38 pm |
| East System vs. West System Epoxy By: Rick Mitchell | 4/6/2000, 12:40 pm |
| Travelling to Chicago By: Marcelo | 4/6/2000, 8:07 am |
| how do you design a stitch and glue kayak By: Darren Neff | 4/5/2000, 10:04 pm |
| Epoxy Filler By: Johnnie McNeely | 4/5/2000, 9:48 pm |
| aligning forms on strongback By: helster | 4/5/2000, 8:09 pm |
| Ding-All Epoxy Source By: Spidey | 4/5/2000, 2:53 pm |
| Hey Marcelo - We're Worried about you . . . By: mike allen ---} | 4/5/2000, 12:24 pm |
| Wee Lassie II progress (photo) By: Ross Leidy | 4/5/2000, 10:08 am |
| Spidey - your steaming tip works great By: Jason | 4/5/2000, 9:56 am |
| Re: skirt for Chessapeake boats --- short rant By: Nolan | 4/5/2000, 8:11 am |
| Come on George, we already knew that one :-) By: Doug K | 4/5/2000, 4:48 am |
| Public Apology to 3M By: Spidey | 4/4/2000, 8:43 pm |
| A Blonde and a Brunette - image - Rendezvous By: Joe Greenley | 4/4/2000, 8:30 pm |
| Removing uncured fiberglass By: Ed Gandorf | 4/4/2000, 3:26 pm |
| Don Beale's Scarfing Jig By: Spidey | 4/4/2000, 1:14 pm |
| Scarf joint problem (1/4" x 3/16 strips) By: Jason | 4/4/2000, 10:00 am |
| Glassing coaming lips By: Kent LeBoutillier | 4/4/2000, 9:39 am |
| skirt for chessappeake boats By: pete czerpak | 4/4/2000, 8:12 am |
| Greenland style kayaks By: Sean Underhill | 4/4/2000, 8:11 am |
| new boat construction By: pete czerpak | 4/4/2000, 8:08 am |
| Glassing the SpiderBoat (Photo) By: Spidey | 4/3/2000, 10:06 pm |
| Any Wood strip get togethers on the East Coast. By: Walter H. Klaus | 4/3/2000, 8:56 pm |
| Attaching Sheer Clamps By: Dennis | 4/3/2000, 7:50 pm |
| CLC replace nails with dowels By: Bill Heuser | 4/3/2000, 2:52 pm |
| Links: It's all on the web... but where? By: Tim Stough | 4/3/2000, 2:09 pm |
| New URL for the Kayak Forum By: Nick Schade - Guillemot Kayaks | 4/3/2000, 11:53 am |
| Lake Union Round Up By: eric | 4/3/2000, 1:16 am |
| Color variations By: Don Beale | 4/3/2000, 12:27 am |
| Wrinkles! :( By: Armin | 4/2/2000, 11:51 pm |
| S&G Hull- Strip Deck By: Johnnie McNeely | 4/2/2000, 11:12 pm |
| I need advice on these plans By: David Blodgett | 4/2/2000, 10:05 pm |
| Greenland Paddle By: Mike Nicholson | 4/2/2000, 8:48 pm |
| Screw holes By: Don Price | 4/2/2000, 6:45 pm |
| N. Alaska Recovery Kayak By: Tim LaTourette | 4/2/2000, 6:10 pm |
| Coho Keel Strip By: Bruce Kahn | 4/2/2000, 5:35 pm |
| Missaligned!! By: Marcelo | 4/2/2000, 3:39 pm |
| precoat problems By: Dale Frolander | 4/2/2000, 3:09 pm |
| Pygmy Deck Modifications Done! (picture) By: Tim Stough | 4/2/2000, 2:58 pm |
| First Picture By: Larry Thompson | 4/1/2000, 11:42 pm |
| Steel Backbone By: Don | 4/1/2000, 5:05 pm |
| Cove and Bead info By: Delaney | 4/1/2000, 4:33 pm |
| Finding cove and bead strips? By: Delaney | 4/1/2000, 4:29 pm |
| Converting to metric By: Ole Kjeldgaard | 4/1/2000, 1:41 pm |
| Cockpit Coaming By: Tracy | 3/31/2000, 10:06 pm |
| Purplehearted Newby By: Warren | 3/31/2000, 8:04 pm |
| Foot pegs By: Toby M. Ebens | 3/31/2000, 7:59 pm |
| Precoat or not?- A survey By: Larry C. | 3/31/2000, 12:28 pm |
| Can't Decide By: Kent LeBoutillier | 3/31/2000, 11:47 am |
| Slightly Off-Topic - Looking for Gutter Clamps By: Greg Hicks | 3/31/2000, 10:46 am |
| And yet another one hits the water... By: Paul Lund | 3/31/2000, 9:25 am |
| Article on the baidarka... By: Hank | 3/31/2000, 8:52 am |
| Epoxy filler By: Dale Frolander | 3/31/2000, 5:27 am |
| Keel reinforcement tape frustration By: David | 3/30/2000, 11:41 pm |
| Air Compressor! By: Johnnie McNeely | 3/30/2000, 8:01 pm |
| To be or knot to be By: Ray | 3/30/2000, 7:39 pm |
| inlaying Pygmies By: Chuck Bollong | 3/30/2000, 3:18 pm |
| cove and bead By: Butch | 3/30/2000, 3:17 pm |
| The survey continues... the next steps. By: Hank | 3/30/2000, 11:38 am |
| Sqeedunk Cormorant ???'s for GRANT By: Wayne Poulsen | 3/30/2000, 9:39 am |
| Sanding-Before-Epoxy Survey By: Spidey | 3/29/2000, 10:37 pm |
| Flush hatch question By: Larry | 3/29/2000, 9:59 pm |
| Ferrules for paddles By: Brian Conklin | 3/29/2000, 8:54 pm |
| Interested in building wood framed canvas kayak By: Basil Arrick | 3/29/2000, 5:43 pm |
| spray skirt By: Steve H. | 3/29/2000, 4:13 pm |
| New web site up By: John Michne | 3/29/2000, 1:01 pm |
| Pygmy Deck Modifications... Suggestions? By: Tim Stough | 3/28/2000, 10:59 pm |
| Re:"far" :) By: lee | 3/28/2000, 10:13 pm |
| Fiberglass Tape Edge By: Mike Brack | 3/28/2000, 9:36 pm |
| Storm Paddle By: Kent LeBoutillier | 3/28/2000, 5:58 pm |
| Patuxent By: Ben Van Enk | 3/28/2000, 2:43 pm |
| Skeg and footbrace installation? By: Todd | 3/28/2000, 12:59 pm |
| adjusting offsets guillemont single By: mark evans | 3/28/2000, 1:59 am |
| Greenland paddle By: Johnnie | 3/27/2000, 9:51 pm |
| Hyperform By: Arty | 3/27/2000, 9:32 pm |
| Some ideas By: Bill Heuser | 3/27/2000, 9:00 pm |
| dacron By: lynda smith | 3/27/2000, 8:07 pm |
| Another one hits the water By: Ken Barron | 3/27/2000, 6:33 pm |
| Clean-up time again! By: Paul Lund | 3/27/2000, 6:28 pm |
| plans for first kayak project for kids By: Gary Dabrowski | 3/27/2000, 4:55 pm |
| What to do? By: Derek Schumann | 3/27/2000, 2:00 pm |
| walnut not good for boatbuilding? By: Dean Trexel | 3/27/2000, 8:40 am |
| Learn from mistakes By: Bill Heuser | 3/27/2000, 8:07 am |
| Re: epoxy quantity By: Rick thomas | 3/27/2000, 12:08 am |
| hatch lip help By: tom Preska | 3/26/2000, 11:01 pm |
| And yet another! By: Tom Davies | 3/26/2000, 10:32 pm |
| anothr one hit the water By: erez | 3/26/2000, 10:08 pm |
| stitch and glue plans for 1st time builder By: Ken Sutherland | 3/26/2000, 7:53 pm |
| stripper squirt boat for flat water By: david Blodgett | 3/26/2000, 6:51 pm |
| Re:how far? By: lee | 3/26/2000, 6:00 pm |
| deck rigging newbie By: Steve L. Ostrem | 3/26/2000, 4:13 pm |
| Perception Hatch Kits By: Frank Costanzo | 3/26/2000, 3:57 pm |
| New Kayak By: Hans Friedel | 3/26/2000, 2:44 pm |
| Outside Air System By: Randy Ames | 3/26/2000, 10:58 am |
| Need for "Gappers" By: Rich Bechtold | 3/26/2000, 10:37 am |
| New Web Page Up... By: Tim Stough | 3/26/2000, 10:32 am |
| New International symbol for spidey and others By: Dale Frolander | 3/26/2000, 2:08 am |
| Skeg construction By: Gary B | 3/26/2000, 2:07 am |
| Drilling holes in the boat By: Tom Davies | 3/25/2000, 9:45 pm |
| epoxy quantity By: Tom Kurth | 3/25/2000, 8:49 pm |
| Re: Greenland paddle By: Bill Heuser | 3/25/2000, 7:09 pm |
| Canvas treatment? By: Ben-B | 3/25/2000, 7:00 pm |
| Dumb Epoxy question?? By: doug | 3/25/2000, 5:05 pm |
| yellow bungie By: Dave Canning | 3/25/2000, 10:53 am |
| Unhappy epoxier/sander revisited By: Travis | 3/24/2000, 10:34 pm |
| building 1st kayak By: Tom Creeley | 3/24/2000, 10:25 pm |
| Posters of your boat By: Brian T. Cunningham | 3/24/2000, 3:50 pm |
| On purchasing a Yare kayak By: lorna | 3/24/2000, 1:33 pm |
| New Web site By: Kent LeBoutillier | 3/24/2000, 11:52 am |
| Greenland paddle By: Ed Walshe | 3/24/2000, 7:10 am |
| Holy toledo I agree with George!!! By: Doug K | 3/23/2000, 10:42 pm |
| car top carrier By: Jay Roberts | 3/23/2000, 6:22 pm |
| what makes a sea kayak? By: goethean | 3/23/2000, 12:35 pm |
| test pics By: Kent LeBoutillier | 3/23/2000, 12:06 pm |
| Great Lakes Small Craft Symposium 3 By: Gerald McQuinn | 3/23/2000, 10:43 am |
| Kayak-builders Heaven By: Peter H | 3/22/2000, 2:19 pm |
| strongback design? By: Julie Kanarr | 3/22/2000, 1:39 pm |
| Free web page providers By: Kent LeBoutillier | 3/22/2000, 11:19 am |
| I'm in Sea Kayaker!! By: Shawn Baker | 3/22/2000, 9:48 am |
| Glass of champagne (We hit 25K messages!) By: Marcelo 9 7/8 | 3/22/2000, 6:49 am |
| Help! Foot Peg holes By: Tom Davies | 3/22/2000, 12:58 am |
| deck design By: Tom Kurth | 3/21/2000, 11:15 pm |
| New construction pics By: Kent LeBoutillier | 3/21/2000, 8:23 pm |
| Building a Fibreglass Canoe/Kayak By: Caesar Bruno | 3/21/2000, 6:40 pm |
| Brewery Creek Small Boat Shop? By: DJ Gaker | 3/21/2000, 4:41 pm |
| Rudder Sources By: Derek Schumann | 3/21/2000, 4:38 pm |
| Pics with the Coast Guard By: Brian T. Cunningham | 3/21/2000, 4:36 pm |
| Guillemot Fast Double, deck wont fit hull By: Ronald J. Crowley | 3/21/2000, 11:51 am |
| Can't find decent 1/8" plywood! I live in Detroit By: Nils S. | 3/21/2000, 1:48 am |
| kayak seats By: jjacques beaulieu | 3/20/2000, 7:13 pm |
| How does 3M do it? By: Spidey | 3/20/2000, 6:45 pm |
| Paddle blades By: Ron Stolp | 3/20/2000, 2:39 pm |
| Cheap Fiberglass By: Shawn Baker | 3/20/2000, 12:53 pm |
| Interthane Paints and Varnishes By: Nate | 3/20/2000, 12:50 pm |
| Custom Fiberglass Seat By: Shawn Baker | 3/20/2000, 12:10 pm |
| 30 yards of glass By: Edgar Kleindinst | 3/20/2000, 8:23 am |
| Unhappy Epoxier By: Travis | 3/20/2000, 8:10 am |
| Wood Properties By: Chris Casazza | 3/20/2000, 7:55 am |
| Kayak design artical in Scientific American By: Chris Menard | 3/20/2000, 7:51 am |
| Lauan plywood warning By: David Dick | 3/20/2000, 7:07 am |
| foam for the seat By: Kevin | 3/19/2000, 10:53 pm |
| Altering form spacing: Outer Island By: Cynthia Bates | 3/19/2000, 9:19 pm |
| Epoxy Drool By: Travis | 3/19/2000, 6:11 pm |
| Fiberglass problems on stems! By: Travis | 3/19/2000, 3:07 pm |
| Block Plane Angle By: Mitch Isoe | 3/19/2000, 10:40 am |
| doorskin plywood for hull???Please advise By: Nils S. | 3/19/2000, 3:06 am |
| For Newbies - Last of the Hull Construction By: Spidey | 3/19/2000, 1:02 am |
| Charleston Show By: Johnnie McNeely | 3/18/2000, 9:43 pm |
| Measuring small amounts of epoxy By: John B. | 3/18/2000, 1:39 pm |
| raka homepage down???? By: Jay Roberts | 3/17/2000, 6:12 pm |
| THANKS !! One down 3 to go By: Brian T. Cunningham | 3/17/2000, 4:23 pm |
| they want to remove the ban on ivory trade ! By: Erez | 3/17/2000, 3:04 pm |
| Newbie with some questions By: Ed Gandorf | 3/17/2000, 2:46 pm |
| Erin Go Bragh! By: Jim McCool | 3/17/2000, 12:46 pm |
| More Construction pictures (photo) By: Shawn Baker | 3/17/2000, 11:48 am |
| More Construction Pix (Photo) By: Spidey | 3/17/2000, 3:24 am |
| customizing your yak for fishing By: dave | 3/16/2000, 2:45 pm |
| Putz canvas kayak By: Gary Schpero | 3/16/2000, 11:03 am |
| Cloudy Epoxy By: Jody | 3/16/2000, 12:18 am |
| hey rehd & the others - not kayak related By: erez | 3/15/2000, 11:07 pm |
| low angle block planes By: Hank | 3/15/2000, 10:59 pm |
| Stems and Visual Laryngitis By: Spidey | 3/15/2000, 8:40 pm |
| Paddle Problems By: Johnnie McNeely | 3/15/2000, 8:12 pm |
| designing using cad By: Bryan Gleason | 3/15/2000, 6:28 pm |
| Slow Day at the BBS By: Peter H | 3/15/2000, 4:38 pm |
| Scarfing the shear clamps By: Brian T. Cunningham | 3/14/2000, 3:10 pm |
| A FEW QUESTIONS FROM A BEGINER By: CULPER | 3/14/2000, 1:35 pm |
| you didn't warn me... By: Chris Loeliger | 3/14/2000, 3:02 am |
| Guillemot Photos Finally (image) By: Shawn Baker | 3/13/2000, 2:10 pm |
| Who's going to the Maine Wood Boat Show? By: Kent LeBoutillier | 3/13/2000, 11:43 am |
| Standard Cockpit Size By: Larry Thompson | 3/13/2000, 9:46 am |
| printing on fiberglass By: erez | 3/13/2000, 12:40 am |
| Which Epoxy & Hardener do you recommend? By: Robert Beggs | 3/12/2000, 3:23 pm |
| Coho questions By: Doug | 3/12/2000, 2:53 pm |
| Hull prep for cured epoxy? By: Will Stark | 3/11/2000, 7:25 pm |
| Great Lake Small Craft Symposium 3 By: Gerald McQuinn | 3/11/2000, 3:18 pm |
| Great Day! By: Johnnie McNeely | 3/11/2000, 8:18 am |
| Epoxy and Varnish questions By: Tom Davies | 3/11/2000, 2:30 am |
| Foam Seat Carving Tool By: Paul Willliams | 3/10/2000, 11:35 pm |
| Images on kayaks - photocopying onto glass cloth By: Grant Goltz | 3/10/2000, 5:08 pm |
| Fillet Mix questions... By: Todd | 3/10/2000, 1:13 pm |
| CLC Severn By: Ed Coon | 3/10/2000, 1:00 pm |
| Dynel Fabric? By: Ratt Boy | 3/10/2000, 11:02 am |
| A table saw ripping technique By: Nolan | 3/10/2000, 6:57 am |
| river kayak saga By: Jim Eisenmenger | 3/10/2000, 6:57 am |
| New combing pictures. By: Dale Frolander | 3/10/2000, 5:45 am |
| Paddles By: Johnnie McNeely | 3/9/2000, 10:04 pm |
| Oxford Rowing Shell By: DJ Gaker | 3/9/2000, 5:49 pm |
| Attention Expoxy Fans By: Brian T. Cunningham | 3/9/2000, 3:25 pm |
| Cab-O-Sil Grades By: Dennis | 3/9/2000, 11:44 am |
| Ready for varnish, question... By: Alan | 3/9/2000, 10:01 am |
| strips past end form By: mark stevens | 3/9/2000, 9:47 am |
| Deck Rigging By: Ken Finger | 3/9/2000, 7:35 am |
| Shops in/near Chicago By: Ed Walshe | 3/9/2000, 3:30 am |
| saturator gun By: flint richter | 3/9/2000, 12:22 am |
| finish sanding By: Craig Ward | 3/8/2000, 6:43 pm |
| cedar colors By: addison | 3/8/2000, 5:03 pm |
| Dura Tuff By: Jay Babina | 3/8/2000, 12:17 pm |
| Guillemot Awards: The envelope please... By: Jack | 3/8/2000, 10:40 am |
| atlanta GA area builders By: pete czerpak | 3/8/2000, 9:03 am |
| Guillemot strip quantity By: Chris Menard | 3/8/2000, 8:33 am |
| Measuring line By: Bill Heuser | 3/8/2000, 6:48 am |
| Barely off topic: Sense of community By: Marcelo 9 7/8 | 3/8/2000, 6:07 am |
| Steam & Hot Air Rule . . . By: Spidey | 3/8/2000, 2:14 am |
| I never pictured George as the drinking type :-) By: Doug K | 3/7/2000, 11:01 pm |
| Unfair lines part 2 By: Johnnie McNeely | 3/7/2000, 7:44 pm |
| Duct tape goo By: Chris Loeliger | 3/7/2000, 3:58 pm |
| Panel coloration and sanding By: David | 3/7/2000, 3:16 pm |
| ROTFLMAO! By: Shawn Baker | 3/7/2000, 11:19 am |
| SO kayak dream By: pete czerpak | 3/7/2000, 7:42 am |
| Re: Found Memories, well what I can remember! By: Ian Johnston | 3/7/2000, 3:25 am |
| Hey y'all, lee's up on the CLC web cam! By: Will Stark | 3/7/2000, 12:06 am |
| Bubbles in the Joints By: Bruce | 3/6/2000, 11:12 pm |
| butt joint problems x 2 By: Sue | 3/6/2000, 10:34 pm |
| Yet another great tool By: Spidey | 3/6/2000, 10:22 pm |
| bead&cove router bits By: shawn hartnett | 3/6/2000, 10:00 pm |
| Live well By: Johnnie McNeely | 3/6/2000, 9:59 pm |
| Epoxy Fumes By: Will Stark | 3/6/2000, 9:37 pm |
| Another wood question By: Tom Davies | 3/6/2000, 8:56 pm |
| Wood for Kayak By: Tom Davies | 3/6/2000, 7:30 pm |
| Unfair lines! By: Johnnie McNeely | 3/6/2000, 6:11 pm |
| Painting Fiberglass By: Bill | 3/6/2000, 4:43 pm |
| where can I find Minicel Foam? By: Warren Ross | 3/6/2000, 2:03 pm |
| Painting a skin-on-frame By: Kelly Trehearne | 3/6/2000, 10:55 am |
| Translating Nick's book to spanish By: Marcelo 9 7/8 | 3/6/2000, 10:21 am |
| S&G or strip built sit-on-top kayak By: Steve Kroeker | 3/6/2000, 10:11 am |
| Epoxy By: Rick thomas | 3/6/2000, 10:09 am |
| 'glass By: Brett | 3/5/2000, 11:39 pm |
| help! By: tom Preska | 3/5/2000, 10:50 pm |
| Hey Nick, Don Has Some Issues !!! By: Ian Johnston | 3/5/2000, 9:15 pm |
| this is the cause By: garland | 3/5/2000, 2:41 pm |
| Updated Pages By: Bill Jankowski | 3/5/2000, 1:54 pm |
| strongback length By: John Waddington | 3/5/2000, 6:57 am |
| More pix up + question By: Spidey | 3/5/2000, 12:23 am |
| rudder By: dave mcadoo | 3/4/2000, 10:21 am |
| Chamfering deck joints on multipaneled deck By: Gary B | 3/4/2000, 1:49 am |
| Kayak Modifications By: Johnnie McNeely | 3/4/2000, 1:44 am |
| Red fish By: Johnnie McNeely | 3/4/2000, 12:00 am |
| equipment stores in Dallas TX By: erez | 3/3/2000, 11:45 pm |
| Source of Fiberglass By: Larry Thompson | 3/3/2000, 11:36 pm |
| St Patty's Day by Shawn By: Nick Schade - Guillemot Kayaks | 3/3/2000, 6:06 pm |
| Flaking Epoxy?! By: Brion | 3/3/2000, 2:56 pm |
| Why add linseed oil to paint By: Robert Sonday | 3/3/2000, 2:30 pm |
| WEB HOSTING By: Greg Hicks | 3/3/2000, 2:10 pm |
| Defthane polyurethane By: Bill Light | 3/3/2000, 12:32 pm |
| Interesting boat building web page By: Nolan | 3/3/2000, 7:24 am |
| 12-1/2 degree Block Plane By: Spidey | 3/3/2000, 12:50 am |
| Need suggestions with bow & stern stems By: Spidey | 3/3/2000, 12:15 am |
| fillers & white wood By: Tom Kurth | 3/2/2000, 11:17 pm |
| Unusual Wood for NE - Pacific Cypress?? By: John B. | 3/2/2000, 6:52 pm |
| Shop Space Limited? Move It To The Living Room! By: Joe Greenley | 3/2/2000, 6:16 pm |
| Carbide cloth cutter?? By: Randy Knauff | 3/2/2000, 6:02 pm |
| Removal of Excess Epoxy By: Mike Brack | 3/2/2000, 3:57 pm |
| patuxent 17 or mersanger 17 By: pete czerpak | 3/2/2000, 8:40 am |
| Machinist's Flea Market FL - This Week By: Spidey | 3/2/2000, 12:45 am |
| Lay up for squirt boat. By: David Blodgett | 3/1/2000, 11:29 pm |
| Sanding and fiberglass By: John Herr | 3/1/2000, 7:55 pm |
| Cormorant Multi-Paneled deck offsets By: Grant Goltz | 3/1/2000, 5:44 pm |
| Arctic Tern and related stuff By: David | 3/1/2000, 3:55 pm |
| BUFFING FINAL COAT OF VARNISH By: STEVE POLLACK | 3/1/2000, 8:16 am |
| Skeg questions By: Dave Canning | 3/1/2000, 12:51 am |
| Ouch!! Bad Fit . . . By: Spidey | 2/29/2000, 7:14 pm |
| Found a Guillemot kit on ebay By: Ross Leidy | 2/29/2000, 4:01 pm |
| multipaneled decks By: pete czerpak | 2/29/2000, 1:21 pm |
| QUESTION RE SYSTEM 3 EPOXY By: t madill | 2/29/2000, 10:24 am |
| want to see a clc kayak in VA By: Lee Barnhardt | 2/29/2000, 9:54 am |
| stringing forms By: Chris Menard | 2/29/2000, 7:43 am |
| Epoxy over paper and ink By: Brian G. | 2/29/2000, 1:52 am |
| Kwajalien By: Johnnie McNeely | 2/28/2000, 10:41 pm |
| Stitching: Like Magic! By: Tim Stough | 2/28/2000, 12:18 pm |
| good kayak seat... By: Jonathan Goulding | 2/28/2000, 8:51 am |
| Joining (and fiberglassing) hull and deck By: Marcelo 9 7/8 | 2/28/2000, 8:15 am |
| Ran out of strips By: Marcelo 9 7/8 | 2/28/2000, 8:04 am |
| lofting and diagonals By: Joey Brannon | 2/28/2000, 12:04 am |
| West system epoxy Portland By: Bob Hysen | 2/27/2000, 11:34 pm |
| Bendable Plywood By: Bill Heuser | 2/27/2000, 9:06 pm |
| "feathering" a kayak paddle By: Quent | 2/27/2000, 6:26 pm |
| Internal Bunge By: Doyle | 2/27/2000, 6:12 pm |
| Newbie seeking advice on which model By: Jerry Hayes | 2/27/2000, 6:05 pm |
| cove and bead By: Don Campbell | 2/27/2000, 6:03 pm |
| around Manhattan By: Thor-Erik Johansen | 2/27/2000, 2:42 pm |
| design vs reality By: Steve Davis | 2/27/2000, 2:10 pm |
| IDIDIT By: Ray Irons | 2/27/2000, 1:46 pm |
| South Puget Sound Wooden Kayak Paddling Club By: Jerry K | 2/27/2000, 11:16 am |
| Page Up! By: Bill Jankowski | 2/27/2000, 8:22 am |
| Finally Started By: Larry Thompson | 2/26/2000, 11:16 pm |
| Polyester Resin as a Final Finish? By: Spidey | 2/26/2000, 1:53 pm |
| Paddle plans By: Johnnie McNeely | 2/26/2000, 11:26 am |
| Stapleless Update By: Spidey | 2/26/2000, 12:37 am |
| What am I missing here? By: Bruce | 2/25/2000, 11:08 pm |
| quiz - image By: erez | 2/25/2000, 9:56 pm |
| I'M A SICK PUP! By: Kent LeBoutillier | 2/25/2000, 7:24 pm |
| Have you heard the one about...? By: Steve Nieman | 2/25/2000, 4:40 pm |
| $10 router bit set does bead, cove, and planing By: Paul G. Jacobson | 2/25/2000, 9:22 am |
| Re: which is often just what you wanted By: Ross Leidy | 2/24/2000, 9:05 pm |
| Prep for glassing the hull By: Dave Murphy | 2/24/2000, 8:53 pm |
| Another Flush-Hatch Question By: Dennis | 2/24/2000, 6:57 pm |
| cabinet scrapers By: Chris Bush | 2/24/2000, 3:23 pm |
| Foot braces for an Arctic Tern By: Michael Brokenshire | 2/24/2000, 9:28 am |
| Outside stems or not? By: Travis | 2/23/2000, 11:56 pm |
| System 3 trial pack By: Ed | 2/23/2000, 10:44 pm |
| Seats, float bags & fitting out By: Steve in San Diego | 2/23/2000, 7:21 pm |
| minicell By: Berkeley C. | 2/23/2000, 6:51 pm |
| Using Different Epoxies By: Fritz OConnor | 2/23/2000, 6:51 pm |
| Using Two Different Epoxies By: Fritz OConnor | 2/23/2000, 2:37 pm |
| Planing Fresh (Green) Epoxy By: Paul C. | 2/23/2000, 11:59 am |
| Suggestions for routing B&C on strips? By: Hank | 2/23/2000, 11:28 am |
| VCP hatches ??? By: willy dommen | 2/23/2000, 11:13 am |
| Tern weathercoking and such performance By: pete czerpak | 2/23/2000, 8:38 am |
| Stitchless S&G construction By: Gary B. | 2/23/2000, 1:07 am |
| Cormorant 16 offsets up By: Grant Goltz | 2/23/2000, 12:13 am |
| hip and knee braces, Olympic Penninsula By: Dave Uebele | 2/22/2000, 3:01 pm |
| grades of okuome (1088 vs 6566) By: pete czerpak | 2/22/2000, 1:37 pm |
| Rebuilding a Klepper By: Lew Crenshaw | 2/22/2000, 12:17 pm |
| Re-working Laughing Loon, NorthStar Plans?! By: Brian Ruttle | 2/22/2000, 11:56 am |
| Anyone built a Redbird By: Chris Dore | 2/22/2000, 11:17 am |
| Re: Problum with Rob Macks North Star plans? By: Greg | 2/21/2000, 11:45 pm |
| Re: Your Problems By: Spidey | 2/21/2000, 11:03 pm |
| Re: Problem? By: mike allen ---> | 2/21/2000, 4:59 pm |
| Epoxy drips and so forth... By: Jonathan Goulding | 2/21/2000, 4:44 pm |
| My Latest Project By: Kent LeBoutillier | 2/21/2000, 1:02 pm |
| Rigging Bow & Stern Ends By: Paul Willliams | 2/21/2000, 12:40 pm |
| Visiting California... any builders? By: Hank | 2/21/2000, 12:32 pm |
| My method of stapleless construction By: Walter H. Klaus | 2/21/2000, 7:40 am |
| Two combing questions By: Dale Frolander | 2/21/2000, 2:56 am |
| Birch Strips By: Roland Baldwin | 2/21/2000, 2:23 am |
| Coho? Osprey HP??? By: John D. | 2/20/2000, 11:42 pm |
| Deck Rigging By: tom preska | 2/20/2000, 10:15 pm |
| Applying graphics By: Brion | 2/20/2000, 8:31 pm |
| Latex gloves By: Ed | 2/20/2000, 1:12 pm |
| Sprayskirt size By: Dennis Horak | 2/19/2000, 8:29 am |
| WALL STORAGE By: Phil Newman | 2/19/2000, 1:23 am |
| Respirators By: Shawn Baker | 2/18/2000, 11:19 pm |
| Plywood in the Portland Oregon area? By: Bob Hysen | 2/18/2000, 10:46 pm |
| We're going to do it! By: Cathy | 2/18/2000, 10:16 pm |
| S&G questions By: garland reese | 2/18/2000, 10:08 pm |
| Visiting the US By: Marcelo 9 7/8 | 2/18/2000, 12:57 pm |
| Vacuum Bagging: Has anyone tried it? By: Jack | 2/18/2000, 10:40 am |
| shearwater boats By: pete czerpak | 2/18/2000, 9:28 am |
| Stapleless Update By: Spidey | 2/18/2000, 1:09 am |
| Re: Question for George By: Dean Trexel | 2/17/2000, 4:51 pm |
| Kits, kits everywhere... By: Tim Stough | 2/17/2000, 3:09 pm |
| Varnish By: Doyle | 2/17/2000, 1:21 pm |
| the importance of gloves By: erez | 2/17/2000, 1:09 pm |
| Child safety seat By: Paul G. Jacobson | 2/17/2000, 12:49 pm |
| Hollow shaft Paddles By: Kent LeBoutillier | 2/17/2000, 12:08 pm |
| favorite seat? By: deeds | 2/17/2000, 11:25 am |
| Re: Question for George By: Ian Johnston | 2/17/2000, 2:02 am |
| Marine plywood in Seattle? By: Ian Salkind | 2/16/2000, 10:24 pm |
| storage volume of CLC boats By: Quent | 2/16/2000, 9:53 pm |
| Getting a new kayak hauler By: Dean Trexel | 2/16/2000, 7:58 pm |
| idea for quick cinstruction By: Ryan White | 2/16/2000, 2:50 pm |
| Glassing my Guillemot By: Marcelo 9 7/8 | 2/16/2000, 1:03 pm |
| Paddle-building pages (Dean - don't read) By: Ross Leidy | 2/16/2000, 12:35 pm |
| Respond top stapless building By: Rick thomas | 2/16/2000, 10:38 am |
| Internal Stems By: Chris Menard | 2/16/2000, 10:11 am |
| solvents By: lee | 2/16/2000, 9:30 am |
| Varnish or Urethane which is best??? By: Hank | 2/16/2000, 8:32 am |
| Re: Question for George By: Bart Castleberry | 2/15/2000, 11:24 pm |
| Request for newbie kayak building advice By: Steven Jarvis | 2/15/2000, 11:01 pm |
| Stapleless.....and winning By: Rick thomas | 2/15/2000, 8:47 pm |
| Deck Fittings By: James Neely | 2/15/2000, 12:02 pm |
| Building Order By: Derek | 2/15/2000, 11:35 am |
| Drop check! By: Jack Martin | 2/15/2000, 8:54 am |
| Stapleless so far - Website updates By: Spidey | 2/15/2000, 1:10 am |
| kayak paddle blade construction By: Brent | 2/15/2000, 12:17 am |
| Bad start: Need some epoxy advice By: Larry Sutton | 2/14/2000, 9:18 pm |
| Question for George By: Dean Trexel | 2/14/2000, 7:19 pm |
| Oh Happy Day and Thank You By: Liz Leedham | 2/14/2000, 3:16 pm |
| [Delurking] Damp S&G Panels By: Tim Stough | 2/14/2000, 2:20 pm |
| cleaning epoxy resin off hull panels By: Julie Kanarr | 2/14/2000, 12:57 pm |
| Hardware By: Mike Snell | 2/14/2000, 11:58 am |
| hatch locations By: Tom Preska | 2/14/2000, 11:20 am |
| Is it too late? By: Doug Bauer | 2/14/2000, 11:05 am |
| Re: fruitless By: David Dick | 2/14/2000, 7:35 am |
| geodesic aeroolite boats By: Ed | 2/13/2000, 6:46 pm |
| Tyvek as a skin By: Quent | 2/13/2000, 5:12 pm |
| Artic Tern - Recessed Deck Fittings By: Paul Willliams | 2/13/2000, 4:03 pm |
| Setting up forms - any tips? By: Peter | 2/13/2000, 3:05 pm |
| My new projekt (pics) By: Hans Friedel | 2/13/2000, 12:32 pm |
| Epoxy that didn't go off - Help! By: Chris in Cajun Country | 2/13/2000, 10:55 am |
| Aliphatic / PVA glue By: Simon Fitz-Gerald | 2/13/2000, 3:25 am |
| building sea kayak By: Cathy | 2/12/2000, 11:23 pm |
| Blotchy sealer coat on spruce strips By: Larry | 2/12/2000, 9:19 pm |
| Hip Braces on Osprey Double By: Tom Davies | 2/12/2000, 4:40 pm |
| Progress! (Boards scarfed for CLC LT 17) By: Bill Jankowski | 2/12/2000, 10:18 am |
| More Deck Design Possibilities - Image By: Joe Greenley | 2/11/2000, 7:17 pm |
| wood and canvas By: scooter | 2/11/2000, 6:57 pm |
| wood and canvas By: scooter | 2/11/2000, 6:46 pm |
| Cedar Strip boats are; Fragile???? By: Derek | 2/11/2000, 3:07 pm |
| Router Bits (budget?) By: Mike Hanks | 2/11/2000, 11:38 am |
| Warning about my shellac post By: Spidey | 2/10/2000, 11:49 pm |
| removing glue By: Joan Spinner | 2/10/2000, 8:42 pm |
| stitch and glue boat By: Dan Urist | 2/10/2000, 4:32 pm |
| Greenland paddle - pic1 By: Ross Leidy | 2/10/2000, 9:02 am |
| Mold release for Nick-style hatch lip By: Dean Trexel | 2/9/2000, 8:29 pm |
| Baidarkas, geodesic aerolite boats By: Nathan | 2/9/2000, 2:28 pm |
| Cast your vote for my accent strip (image) By: Shawn Baker | 2/9/2000, 2:01 pm |
| building a sea sock By: Marian Gunkel | 2/9/2000, 1:11 pm |
| mick - About your bevel filing technique By: Spidey | 2/9/2000, 3:19 am |
| Artic Tern Foot Pegs By: Paul Willliams | 2/9/2000, 12:19 am |
| which glue will adhese to c. cell foam ? By: erez | 2/8/2000, 11:39 pm |
| Hatch cutting went well By: Dean Trexel | 2/8/2000, 7:22 pm |
| stich and glue "play" boat By: tom preska | 2/8/2000, 1:08 pm |
| Strip cutting adventures... By: Hank | 2/8/2000, 11:25 am |
| Breakaway Forms By: Chris Menard | 2/8/2000, 8:35 am |
| anyone in jax/fernandina area By: Johnnie McNeely | 2/8/2000, 1:15 am |
| anyone in jax/fernandina area By: Johnnie McNeely | 2/8/2000, 1:08 am |
| Steel for StrongBack? By: Travis | 2/7/2000, 11:54 pm |
| Shellac on the forms By: Spidey | 2/7/2000, 11:08 pm |
| Greenland paddle - so heavy By: Ross Leidy | 2/7/2000, 12:08 pm |
| Nick's S&G - matching deck & hull By: Jim Eisenmenger | 2/7/2000, 9:06 am |
| Butt joints and removing stiching By: t madill | 2/6/2000, 8:16 pm |
| Redbird Canoe Form Question By: Travis | 2/6/2000, 7:37 pm |
| Clamps ON SALE By: Mike Hanks | 2/6/2000, 5:31 pm |
| Building a Night Heron By: Dan Salveta | 2/6/2000, 1:10 pm |
| Building the Osprey Standard By: Wayne R. | 2/6/2000, 12:08 pm |
| cockpit layout By: Larry C. | 2/5/2000, 9:36 pm |
| wet wood By: Don Campbell | 2/5/2000, 10:43 am |
| ultralight bulletin board By: BUZZY | 2/5/2000, 9:19 am |
| Nailing into epoxy? By: Craig Ward | 2/5/2000, 8:35 am |
| Guillemot triple update. By: Dale Frolander | 2/5/2000, 4:00 am |
| No more cratering with RAKA! By: George Burns | 2/5/2000, 3:08 am |
| CONTEST! What's wrong with this Picture? By: Spidey | 2/5/2000, 12:59 am |
| Buying Strips By: Chris Menard | 2/4/2000, 1:38 pm |
| Epoxy fill coat problems By: Tedley in VT. | 2/4/2000, 1:22 pm |
| Peel and ply tape? By: Kent LeBoutillier | 2/4/2000, 12:30 pm |
| Stapled or Stapleless building??? By: Hank | 2/4/2000, 9:40 am |
| Chesapeake 16LT aft bulkhead radius? By: JG | 2/3/2000, 10:33 pm |
| Re: Sanding Before Glassing By: john mayer | 2/3/2000, 9:04 pm |
| Knee Tube - (Right up Shawns Alley) By: Chris Dore | 2/3/2000, 7:44 pm |
| Wood Flour = Saw Dust? By: Bill Jankowski | 2/3/2000, 7:09 pm |
| bead and cove, or plain flat edged strips?? By: Steve McGeorge | 2/3/2000, 3:02 am |
| a few wood questions By: Chris Loeliger | 2/3/2000, 12:44 am |
| Need source of Kevlar Fabric By: Richard | 2/2/2000, 9:54 pm |
| fiberglass chopper gun By: Robert | 2/2/2000, 9:02 pm |
| Cutting Strips - I did it Today! By: Spidey | 2/2/2000, 8:07 pm |
| Cutting Strips - advice needed By: Peter Griffiths | 2/2/2000, 4:01 pm |
| Concidering taking the plunge By: Chris Menard | 2/2/2000, 3:49 pm |
| Coaming Lip - Help??? By: Steve in San Diego | 2/2/2000, 3:27 pm |
| Double Guillemot - progress update By: Derek | 2/2/2000, 12:35 pm |
| Suggestive Curves: Sex Sells By: Jack | 2/2/2000, 10:52 am |
| composite paddle blades construction By: pete czerpak | 2/2/2000, 10:05 am |
| building my first kayak By: Kane Finch | 2/2/2000, 4:44 am |
| Sit on top S&G?? By: Mike | 2/2/2000, 1:18 am |
| Looking for S&G plans By: Mark Woodhead | 2/1/2000, 9:03 pm |
| Composit By: Andy | 2/1/2000, 9:01 pm |
| OKOUME supplier west central Florida???? By: Ed | 2/1/2000, 7:58 pm |
| Cypress Strips for Canoes / Kayaks By: Chris in Cajun Country | 2/1/2000, 6:16 pm |
| the BoatShop builds a Baidarka By: Brian T. Cunningham | 2/1/2000, 5:22 pm |
| Really, really light glass By: Ross Leidy | 2/1/2000, 2:35 pm |
| Little Kayak Book - Out of Print By: Peter H | 2/1/2000, 12:34 pm |
| Pls Help - Need info on building 1st kayak By: Brion | 2/1/2000, 12:48 am |
| removing mold release wax? By: craig appleyard | 1/31/2000, 11:41 pm |
| Hatch seals...to glue or not to glue? By: Doug Bauer | 1/31/2000, 5:11 pm |
| starting a guillemot double By: Lance Alldrin | 1/31/2000, 12:04 pm |
| Philip Greene Canoes Story By: Darrell K. Pearse | 1/31/2000, 11:07 am |
| _hanks _o all of you By: Marcelo 9 7/8 | 1/31/2000, 7:09 am |
| Bandsaw ripping By: Steve Groufsky | 1/31/2000, 4:13 am |
| Old cedar might be brittle ?? By: Spidey | 1/31/2000, 12:11 am |
| Are these books available? By: David Walker | 1/30/2000, 11:43 pm |
| Spruce strips for a kayak? By: Hank | 1/30/2000, 9:12 pm |
| deck/hull joint prep question By: Dean Trexel | 1/30/2000, 8:44 pm |
| "Cuda" kayak By: Don | 1/30/2000, 8:31 pm |
| epoxy hull first By: PHIL COOK | 1/30/2000, 8:18 pm |
| first boat; Baltic Birch Plywood By: Bill Jankowski | 1/30/2000, 1:57 pm |
| Dull Varnish By: Alan Resinger | 1/30/2000, 11:27 am |
| Stripper Sailboats By: BUZZY | 1/30/2000, 9:17 am |
| MAS epoxy - cure time? By: jed | 1/29/2000, 8:44 pm |
| Boat Photos Follow-up By: Dennis | 1/29/2000, 7:58 pm |
| 3rd Newfound Rendezvous question By: Dean Trexel | 1/29/2000, 6:57 pm |
| hatch-in-bulkhead? By: Dean Trexel | 1/29/2000, 6:42 pm |
| I've lost my fingertip :( By: Marcelo | 1/29/2000, 6:28 pm |
| Rudder By: Ed Scullywest | 1/29/2000, 1:25 am |
| Cypress Strips for Kayak By: Don | 1/28/2000, 4:52 pm |
| Source for mahogany in New England By: Bruce | 1/28/2000, 4:12 pm |
| Wee Lassie or Feather By: Jason | 1/28/2000, 2:55 pm |
| CA glue for strip building By: Spidey | 1/28/2000, 1:22 pm |
| Spoke Shave By: Ken Finger | 1/28/2000, 7:43 am |
| Score!!! (I think?) By: Mike Hanks | 1/27/2000, 11:57 pm |
| Okoume in Portland, OR? By: Bill McClelland | 1/27/2000, 6:15 pm |
| Help with offset chart By: Peter | 1/27/2000, 5:16 pm |
| Calling Bowron Lakes Veterans By: Nate | 1/27/2000, 5:08 pm |
| WW Kayak Paddles By: Curt Taylor | 1/27/2000, 10:22 am |
| Sources for elastomeric coatings? By: Doug Bauer | 1/27/2000, 9:11 am |
| Raft Building By: Dave | 1/27/2000, 7:46 am |
| Inside of the hull? By: Fritjof Karlsson | 1/27/2000, 2:05 am |
| kayak design By: Johnnie McNeely | 1/26/2000, 11:29 pm |
| Changing cockpit size By: Larry C. | 1/26/2000, 9:28 pm |
| Table saw By: Steve Groufsky | 1/26/2000, 7:50 pm |
| Steel constructions of any difficulty By: T.Veisberg | 1/26/2000, 6:46 pm |
| Re: :) By: Shawn Baker | 1/26/2000, 6:25 pm |
| New questions By: Chris Loeliger | 1/26/2000, 1:47 pm |
| Wood Strip Car By: Nick Schade - Guillemot Kayaks | 1/26/2000, 10:59 am |
| KeelShield to prevent scratches? By: Dave Houser | 1/26/2000, 9:40 am |
| Kerosene heat and MAS epoxy By: Brian B | 1/26/2000, 8:08 am |
| A quick Tech Question By: Jack | 1/25/2000, 6:10 pm |
| Heresy By: Shawn Baker | 1/25/2000, 5:39 pm |
| Re: Striping without staples By: Tony Ling | 1/25/2000, 12:59 pm |
| Stitching the Opsry Keel By: Wayne R. | 1/25/2000, 5:49 am |
| Epoxy over hatch design By: Don | 1/24/2000, 8:11 pm |
| Artic Tern, Dimple In Side Panel By: Paul Willliams | 1/24/2000, 7:23 pm |
| Sanding epoxy By: Earl Bailey | 1/24/2000, 7:22 pm |
| Advice on butt joints By: Brian T. Cunningham | 1/24/2000, 3:19 pm |
| Update on first boat & advice needed By: Tim Shelburne | 1/24/2000, 11:34 am |
| Continued BBS problems By: Nick Schade | 1/23/2000, 4:50 pm |
| Safest way to cut hatches? By: Dean Trexel | 1/22/2000, 8:57 pm |
| The Hybrid: It Floats! (jpg) By: Pete Roszyk | 1/22/2000, 8:55 pm |
| Any UK Kayak Builders By: peter | 1/22/2000, 3:39 pm |
| A Middle School Kayak? By: Ray Matthews | 1/22/2000, 3:35 pm |
| Finished,Now what?? By: Chris Howie | 1/22/2000, 1:42 pm |
| Besides sinew..... By: Archer Hedendahl | 1/22/2000, 1:20 pm |
| Sea Kayaker`s plan for West River 180 By: Jean,Montreal, | 1/22/2000, 9:52 am |
| CLC templates By: Chris Kohut | 1/22/2000, 9:11 am |
| "Fair" Play By: Ted Fink | 1/22/2000, 8:45 am |
| how much epoxy? By: craig ward | 1/21/2000, 9:07 pm |
| Marine Paint (avail in Portland OR?) By: Nate | 1/21/2000, 5:57 pm |
| Source of okoume plywood in western Canada? By: Richard Boyle | 1/21/2000, 4:14 pm |
| Building my first stripper By: Tim Shelburne | 1/21/2000, 3:35 pm |
| Bow Abrasion By: Ed | 1/21/2000, 3:15 pm |
| Adventures in Scarfing: Hull panel mis-alignment By: Will | 1/21/2000, 12:43 pm |
| Skin on Frame -skin question By: Kelly Trehearne | 1/21/2000, 9:33 am |
| How do you cut Kevlar ? By: Marty H | 1/21/2000, 8:25 am |
| Durability By: Chris Casazza | 1/21/2000, 8:16 am |
| Glue problems By: Kent LeBoutillier | 1/21/2000, 6:18 am |
| Standard Spray Skirt Dimensions? By: Dave Houser | 1/21/2000, 1:07 am |
| Cabinet Scraper Question By: Paul Willliams | 1/20/2000, 11:53 pm |
| Keepers Footbraces in CLC By: Pete Roszyk | 1/20/2000, 2:23 pm |
| Australia Bound - Photo By: Joe Greenley | 1/20/2000, 3:34 am |
| New member & paddle photos By: Spidey | 1/20/2000, 1:11 am |
| Camper Canoe By: Brian T. Cunningham | 1/19/2000, 8:26 pm |
| Rationalizing overbuilding By: Nolan | 1/19/2000, 3:00 pm |
| Durability problems By: Steve Groufsky | 1/19/2000, 2:21 pm |
| Re: So what's it worth? By: Shawn Baker | 1/19/2000, 2:17 pm |
| Beveling Shear Clamps By: Peter H | 1/19/2000, 1:52 pm |
| Pics from Mike Hanks By: Brian T. Cunningham | 1/19/2000, 12:51 pm |
| Cabinet Scrapers By: Will Stark | 1/19/2000, 11:08 am |
| George's Website Address? By: Joe Greenley | 1/19/2000, 10:55 am |
| Butt Joints - Blocks or Tape ??? By: Greg Hicks | 1/19/2000, 10:39 am |
| Okoume = Gaboon? By: Paul Lund | 1/19/2000, 1:58 am |
| cove and bead By: Tom Kurth | 1/18/2000, 11:41 pm |
| Post Endeavour 17 project... By: B.J. | 1/18/2000, 11:12 pm |
| So what's it worth? By: Doug Bauer | 1/18/2000, 5:02 pm |
| Tight seams on CLC kayak. Fluting and Beading? By: Will Stark | 1/18/2000, 2:52 pm |
| Coho Questions By: Doyle | 1/18/2000, 1:41 pm |
| Cool plane By: Ross Leidy | 1/18/2000, 12:36 pm |
| Torro leaf blower By: Jay Babina | 1/18/2000, 12:19 pm |
| Final strips By: Dale Frolander | 1/18/2000, 4:59 am |
| Greenland - skin on frame By: jed | 1/17/2000, 11:05 pm |
| Some pictures of my strip built Kayak By: Jason Miller | 1/17/2000, 10:28 pm |
| Ripping blade By: Mike | 1/17/2000, 9:53 pm |
| plywood framed skin construction By: Joel Goodman | 1/17/2000, 7:42 pm |
| Compass Mount By: Steve Nieman | 1/17/2000, 7:31 pm |
| Coho pic By: Chris Bush | 1/17/2000, 12:55 pm |
| How much Glass By: Derek | 1/17/2000, 11:48 am |
| "Sairy Gamp" Small Kayak By: Randy Ames | 1/17/2000, 11:39 am |
| Just a thought on painting... By: Doug Bauer | 1/17/2000, 10:23 am |
| Expoxy drip where I don`t want it! By: eric | 1/17/2000, 1:36 am |
| Barry and Monel Staples? Server Error By: Mike Hanks | 1/17/2000, 12:58 am |
| Coho Frames By: Bruce | 1/16/2000, 11:55 pm |
| Kayak Pics, How Do You Post Them? By: Paul Willliams | 1/16/2000, 10:47 pm |
| Side Mount Kayak Rack By: Rick Hewitt | 1/16/2000, 12:02 pm |
| Setting the Gunwales By: Archer | 1/16/2000, 7:37 am |
| Launched Plywood Walrus By: Mike Hanks | 1/16/2000, 2:42 am |
| For whom is design software useful?? By: David Walker | 1/16/2000, 2:00 am |
| Tight seams on a CLC kayak, how can it be done? By: Will Stark | 1/15/2000, 10:52 pm |
| Source of foam rollers in Canada By: Hank | 1/15/2000, 2:24 pm |
| Re: skin on frame lots of questions By: Bram | 1/15/2000, 11:27 am |
| Pygmy vs. CLC By: Darrel F. | 1/14/2000, 10:34 pm |
| Re: Stitching wire for Coho By: steve | 1/14/2000, 7:17 pm |
| recessed cockpit on Pygmy By: Steve Nieman | 1/14/2000, 5:18 pm |
| stuttering By: Jessica Johnsen | 1/14/2000, 3:26 pm |
| Gunwales - epoxied 'em By: Ross Leidy | 1/14/2000, 10:34 am |
| colloring Mas Epoxy By: Jack Mitenbuler | 1/14/2000, 10:32 am |
| Re: Shock Cord End Ideas By: Scotty | 1/14/2000, 2:12 am |
| Re: tightening skin on frame By: David Walker | 1/14/2000, 1:29 am |
| Re: Spare/Storm Paddles By: erez | 1/14/2000, 12:36 am |
| I wish I could thank you all enough By: Quent | 1/13/2000, 10:07 pm |
| Thigh Braces - Photo By: Joe Greenley | 1/13/2000, 9:43 pm |
| Re: Beautiful boats By: Tom Kurth | 1/13/2000, 7:55 pm |
| Boat Photos By: Dennis | 1/13/2000, 7:40 pm |
